PDA

View Full Version : Dvd Burner problem


The Bad Guy
04-02-2005, 02:17 PM
I've had my burner since the end of January and I've never had a problem with it.

Until Today.

I was trying to backup Love and Sex for my Fiancee (it's some romantic comedy for all the pervs that thought otherwise) the movie encoded fine and the burn process stopped and when I ejected the disc, there is a weird ring around the disc. I tried another disc and the same thing happened. I've never had one coaster before this.

The Ritek media I have is normally very reliable.

What can I do to fix this problem? I'm running Nero with DVD Shrink and have a NEC burner.

Here is the error I received:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero API version: 6.3.1.25
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <_NEC DVD_RW ND-3520A> Version: 1.04 - HA 1 TA 0 - 6.3.1.25
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-3520A atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
_NEC DVD_RW ND-3520A D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 509MB (522220kB)
Free physical memory: 151MB (154968kB)
Memory in use : 70 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.4.2005
NeroAPI
12:47:00 PM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started

12:47:00 PM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)

12:47:00 PM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted

12:47:00 PM #4 Text 0 File Reader.cpp, Line 126
Reader running

12:47:00 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

12:47:00 PM #6 Text 0 File Writer.cpp, Line 124
Writer _NEC DVD_RW ND-3520A running

12:47:00 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

12:47:00 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

12:47:00 PM #9 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-At-Once, using DVD media

12:47:00 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1828143 (406:15.18, 3570MB)

12:47:00 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO

12:47:00 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: _NEC DVD_RW ND-3520A, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193

12:47:00 PM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:47:00 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1828144 (1828144) = #1828144/406:15.19
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1828144 blocks [_NEC DVD_RW ND-3520A ]
--------------------------------------------------------------

12:47:00 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [_NEC DVD_RW ND-3520A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3744038912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1828144 | lead-out | 1 | 0x00 | 0x41

12:47:01 PM #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started

12:47:01 PM #17 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.

12:47:01 PM #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed

12:47:01 PM #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 4x (5,540 KB/s)

12:47:01 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:47:01 PM #21 Text 0 File DVDR.cpp, Line 2000
Recording mode: Sequential Recording Mode

12:47:01 PM #22 Text 0 File Mmc.cpp, Line 20660
Set BUFE: supported -> ON

12:47:01 PM #23 Text 0 File DVDR.cpp, Line 2141
Start write address at LBA 0
DVD high compatibility mode: Yes

12:47:01 PM #24 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

12:47:03 PM #25 Text 0 File Cdrdrv.cpp, Line 1297
12:47:03.281 - _NEC DVD_RW ND-3520A\H1 T0 : Queue again later

12:50:06 PM #26 SCSI -1093 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B540000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x03 0x24 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0x00

12:50:06 PM #27 CDR -1093 File Writer.cpp, Line 304
No seek complete

12:50:06 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

12:50:06 PM #29 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

12:50:06 PM #30 Text 0 File DVDR.cpp, Line 2383
EndDAO: Last written address was 206047

12:50:06 PM #31 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 4x (5,540 KB/s)

12:50:06 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

12:50:06 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 9/14/2004 9:50:10 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Anyone know why this is?

Thanks in advance.

KCWolfman
04-02-2005, 02:27 PM
Have you updated your burner driver?

The Bad Guy
04-02-2005, 02:31 PM
Have you updated your burner driver?

No, I didn't.

Didn't think I need to since it worked right out of the box with no problems.

KCWolfman
04-02-2005, 02:33 PM
No, I didn't.

Didn't think I need to since it worked right out of the box with no problems.
I didn't update mine either for a year. Then the new encoding techniques caught up and I started making coasters myself. My particular burner uses alpha suffixes to show how many updates have been made. I was at "m" and my manufacturer was up to "u". Since the update, not a single issue.

The Bad Guy
04-02-2005, 02:38 PM
I didn't update mine either for a year. Then the new encoding techniques caught up and I started making coasters myself. My particular burner uses alpha suffixes to show how many updates have been made. I was at "m" and my manufacturer was up to "u". Since the update, not a single issue.

How do I find an update for this burner?

DVD+/-RW 16x|NEC ND-3520A BK W/O SW
(Serial#: 03822401 518AC86S111)

KCWolfman
04-02-2005, 02:56 PM
How do I find an update for this burner?
Near the top of the page. Firmware update for NEC ND-3520A

Firmware Updates (http://tdb.rpc1.org/)

The Bad Guy
04-02-2005, 03:05 PM
Wolf,

Thanks a lot for hte update.

When I click on the program, click run, the dos screen comes up for a second and then goes away.

Did the flash work if it does this?

elvomito
04-02-2005, 06:16 PM
you need to run it from your own dos window to see what it is saying.

dirk digler
04-02-2005, 07:47 PM
Wolf,

Thanks a lot for hte update.

When I click on the program, click run, the dos screen comes up for a second and then goes away.

Did the flash work if it does this?

Bad Guy I would recommend that you not update your firmware quite yet. As you see the flash is beta and if you install it and it messes up your drive you are focked.

Also this is a fairly new drive that NEC has produced hence no new firmware updates yet. Wait until the firmware is finished before updating it.

I just bought this drive 2 weeks ago and has worked great right out of the box. Great drive and there is no need to update quite yet.

Just my IMO.

As far as your problem try burning the DVD again with a new disk you might have had a bad disk. I use the same type of disks as you and luckily I haven't had a coaster.

htismaqe
04-02-2005, 08:07 PM
NEC should be releasing the firmware for the 3520 on May 1, 2005. After that, there should be a non-beta RPC1 firmware available.

I would wait until then to patch.

And one more thing -- you should run the firmware update from a bootable floppy. It is a pure DOS program and won't work well in a window.