View Full Version : What's this "Beryllium" I've heard so much about, and can it help The Chiefs win?

01-08-2007, 11:13 PM

01-08-2007, 11:15 PM
It'll make Trent Greens dong grow, thus encouraging LJ to rush for 600+ yards next season.

01-08-2007, 11:19 PM
Notable characteristics

Beryllium has one of the highest melting points of the light metals. The modulus of elasticity of beryllium is approximately 1/3 greater than that of steel. It has excellent thermal conductivity, is nonmagnetic and resists attack by concentrated nitric acid. It is highly permeable to X-rays, and neutrons are liberated when it is hit by alpha particles, as from radium or polonium (about 30 neutrons/million alpha particles). At standard temperature and pressures beryllium resists oxidation when exposed to air (although its ability to scratch glass is probably due to the formation of a thin layer of the oxide). The speed of sound in beryllium (12,500m/s) is greater than in any other element.

01-08-2007, 11:20 PM
It'll make Trent Greens dong grow, thus encouraging LJ to rush for 600+ yards next season.
Health effects


Beryllium and its salts are toxic substances and potentially carcinogenic. Chronic berylliosis is a pulmonary and systemic granulomatous disease caused by exposure to beryllium. Acute beryllium disease in the form of chemical pneumonitis was first reported in Europe in 1933 and in the United States in 1943. Cases of chronic berylliosis were first described in 1946 among workers in plants manufacturing fluorescent lamps in Massachusetts. Chronic berylliosis resembles sarcoidosis in many respects, and the differential diagnosis is often difficult.

Although the use of beryllium compounds in fluorescent lighting tubes was discontinued in 1949, potential for exposure to beryllium exists in the nuclear and aerospace industries and in the refining of beryllium metal and melting of beryllium-containing alloys, the manufacturing of electronic devices, and the handling of other beryllium-containing material.

Early researchers tasted beryllium and its various compounds for sweetness in order to verify its presence. Modern diagnostic equipment no longer necessitates this highly risky procedure and no attempt should be made to ingest this substance. Beryllium and its compounds should be handled with great care and special precautions must be taken when carrying out any activity which could result in the release of beryllium dust (lung cancer is a possible result of prolonged exposure to beryllium laden dust).

This substance can be handled safely if certain procedures are followed. No attempt should be made to work with beryllium before familiarization with correct handling procedures.

A successful test for beryllium on different surface areas has been recently developed. The procedure uses fluorescence when beryllium is bound to sulfonated hydroxybenzoquinoline to detect up to 10 times lower than the recommended limit for beryllium concentration in the work place. Fluorescence increases with increasing beryllium concentration. The new procedure has been successfully tested on a variety of surfaces.


Beryllium can be harmful if inhaled and the effects depend on period of exposure. If beryllium air levels are high enough (greater than 100 g/m), an acute condition can result, called acute beryllium disease, which resembles pneumonia. Occupational and community air standards are effective in preventing most acute lung damage. Long term exposure to beryllium can increase the risk of developing lung cancer. The more common and serious health hazard from beryllium today is chronic beryllium disease (CBD), discussed below. It continues to occur in industries as diverse as metal recycling, dental laboratories, alloy manufacturing, nuclear weapons production, defense industries, and metal machine shops that work with alloys containing small amounts of beryllium.
A square beryllium foil mounted in a steel case to be used as a window between a vacuum chamber and an X-ray microscope. Beryllium, due to its low Z number is highly transparent to X-rays.
A square beryllium foil mounted in a steel case to be used as a window between a vacuum chamber and an X-ray microscope. Beryllium, due to its low Z number is highly transparent to X-rays.

Chronic beryllium disease (CBD)

Some people (1-15%) become sensitive to beryllium. These individuals may develop an inflammatory reaction that principally targets the respiratory system and skin. This condition is called chronic beryllium disease (CBD), and can occur within a few months or many years after exposure to higher than normal levels of beryllium (greater than 0.02 g/m). This disease causes fatigue, weakness, night sweats and can cause difficulty in breathing and a persistent dry cough. It can result in anorexia, weight loss, and may also lead to right-side heart enlargement and heart disease in advanced cases. Some people who are sensitized to beryllium may not have any symptoms. The disease is treatable but not curable. CBD occurs when the body's immune system recognizes beryllium particles as foreign material and mounts an immune system attack against the particles. Because these particles are typically inhaled into the lungs, the lungs becomes the major site where the immune system responds. The lungs become inflamed, filled with large numbers of white blood cells that accumulate wherever beryllium particles are found. The cells form balls around the beryllium particles called "granulomas." When enough of these granulomas develop, they interfere with the normal function of the organ. Over time, the lungs become stiff and lose their ability to help transfer oxygen from the air into the bloodstream. Patients with CBD develop difficulty inhaling and exhaling sufficient amounts of air and the amount of oxygen in their bloodstreams falls. Treatment of such patients includes use of oxygen and medicines that try to suppress the immune system's over-reaction to beryllium. A class of immunosuppressive medicines called glucocorticoids (example: prednisone), is most commonly used as treatment. The general population is unlikely to develop acute or chronic beryllium disease because ambient air levels of beryllium are normally very low (0.00003-0.0002 g/m).


Swallowing beryllium has not been reported to cause effects in humans because very little beryllium is absorbed from the stomach and intestines. Ulcers have been seen in dogs ingesting beryllium in the diet. Beryllium contact with skin that has been scraped or cut may cause rashes or ulcers, or bumps under the skin called "granulomas."

Effects on children

There are no studies on the health effects of children exposed to beryllium, although individual cases of CBD have been reported in children of beryllium workers from the 1940s. It is likely that the health effects seen in children exposed to beryllium will be similar to the effects seen in adults. It is unknown whether children differ from adults in their susceptibility to beryllium. It is unclear whether beryllium is teratogenic.

Detection in the body

Beryllium can be measured in the urine and blood. The amount of beryllium in blood or urine may not indicate time or quantity of exposure. Beryllium levels can also be measured in lung and skin samples. While such measurements may help establish that exposure has occurred, other tests are used to determine if that exposure has resulted in health effects. A blood test, the blood beryllium lymphocyte proliferation test (BeLPT), identifies beryllium sensitization and has predictive value for CBD. The BeLPT has become the standard test for detecting beryllium sensitization and CBD in individuals who are suspected of having CBD and to help distinguish it from similar conditions such as sarcoidosis. It is also the main test used in industry health programs to monitor whether disease is occurring among current and former workers who have been exposed to beryllium on the job. The test can detect disease that is at an early stage, or can detect disease at more advanced stages of illness as well. The BeLPT can also be performed using cells obtained from a person's lung by a procedure called "bronchoscopy."

01-08-2007, 11:22 PM
But can it control the clock? and carry the ball 426 times?(yep, we're going to bust that carries recoed WIDE open)

01-08-2007, 11:24 PM
But can it control the clock? and carry the ball 426 times?(yep, we're going to bust that carries recoed WIDE open)
Hmmm, doesn't appear to help kill the clock.


* Beryllium is used as an alloying agent in the production of beryllium-copper, containing up to 2.5% beryllium. Beryllium-copper alloys are used in a wide variety of applications because of their combination of high electrical and thermal conductivity, high strength and hardness, nonmagnetic properties, along with good corrosion and fatigue resistance. These applications include the making of spot-welding electrodes, springs, non-sparking tools and electrical contacts.
* Beryllium metal is, due to its stiffness, light weight, and dimensional stability over a wide temperature range, used in the defense and aerospace industries as light-weight structural materials in high-speed aircraft, missiles, space vehicles and communication satellites.
* Thin sheets of beryllium foil are used with X-ray detection diagnostics to filter out visible light and allow only X-rays to be detected.
* Beryllium is an effective p-type dopant in III-V compound semiconductors. It is widely used in materials such as GaAs, AlGaAs, InGaAs, and InAlAs grown by molecular beam epitaxy (MBE).
* In the field of X-ray lithography beryllium is used for the reproduction of microscopic integrated circuits.
* In the telecommunications industry, Beryllium is made into tools that are used to tune the highly magnetic klystrons used for high power microwave transmissions for safety.
* Because it has a low thermal neutron absorption cross section, the nuclear power industry uses this metal in nuclear reactors as a neutron reflector and moderator.
* Beryllium is used in nuclear weapons for similar reasons. For example, the critical mass of a plutonium sphere is significantly reduced if the plutonium is surrounded by a beryllium shell.
* Beryllium is sometimes used in neutron sources, in which the beryllium is mixed with an alpha emitter such as 210Po, 226Ra, 239Pu or 241Am.
* Beryllium is also used in the making of gyroscopes, various computer equipment, watch springs and instruments where light-weight, rigidity and dimensional stability are needed.
* Beryllium oxide is useful for many applications that require an excellent heat conductor, with high strength and hardness, with a very high melting point, and that acts as an electrical insulator.
* Beryllium compounds were once used in fluorescent lighting tubes, but this use was discontinued because of berylliosis in the workers manufacturing the tubes (see below).
* The James Webb Space Telescope[4] will have 18 hexagonal beryllium sections for its mirrors. Because JWST will face a temperature of −240 degrees Celsius (30 kelvins), the mirror is made of beryllium, a material capable of handling extreme cold better than glass. Beryllium contracts and deforms less than glass and thus remains more uniform in such temperatures. For the same reason, the optics of the Spitzer Space Telescope are entirely built of beryllium.
* Beryllium is also used in the Joint European Torus fusion research facility and will be used in ITER, to condition the plasma facing components.[5]
* Beryllium has also been used in tweeter construction by companies like Brush Wellman - Electrofusion Products and Focal-JMlab (on its flagship Utopia Be series) as an alternative to titanium and aluminium, largely due to its lower density and greater rigidity.[6]
* Because of its low atomic number beryllium is almost transparent to energetic electrically charged particles. Therefore it is used to build the beam pipe around the collision region in collider particle physics experiments. Notably all four main experiment at the Large Hadron Collider accelerator (ALICE, ATLAS, CMS, LHCb) use a beryllium beam-pipe.

01-09-2007, 05:26 AM
Can Welbourn shoot it up before games ....

01-09-2007, 08:01 AM
Beryllium is mined by little monkey-like creatures on some planets, Mr. TinyEvel. They have lots of teeth and can call out big rock monsters when they get angry.

That's a bad-ass planet, boy. A lot worse than Earth.


01-09-2007, 08:08 AM
Beryllium is afraid of Jared Allen.

Beryllium runs home to his mommy whenever Jared Allen looks at him.

01-09-2007, 08:09 AM
Bery llium.....Sounds like a used car salesmen.

4th and Long
01-09-2007, 08:11 AM
Beryllium is mined by little monkey-like creatures on some planets, Mr. TinyEvel. They have lots of teeth and can call out big rock monsters when they get angry.

That's a bad-ass planet, boy. A lot worse than Earth.