ChiefsPlanet
Page 205 of 503 « First 105155195201202203204 205 206207208209215255305 Last »
Show 80 post(s) from this thread on one page

ChiefsPlanet (https://www.chiefsplanet.com/BB/index.php)
-   Nzoner's Game Room (https://www.chiefsplanet.com/BB/forumdisplay.php?f=1)
-   -   Other Sports Off Season Lets Talk Guns (https://www.chiefsplanet.com/BB/showthread.php?t=240682)

Dayze 12-22-2012 11:27 PM
http://www.midwayusa.com/product/124...ar-15-a2-matte

would still need your bolt carrier etc.

also check out the AR build vids from ITS tactical on youtube very very informative and simple/ well made

Frazod 12-22-2012 11:38 PM
Quote:
Originally Posted by doomy3 (Post 9233565)
Has anyone here ever assembled an upper from a stripped upper receiver? I picked up a stripped upper today, and I can't find a great guide that outlines exactly what parts I need to pick up to assemble it. Anyone have any recommendations of somewhere that lists exactly what I need to pick up to build this out? I assembled a lower with a parts kit, but I'm not finding anything like that for the upper.
I haven't done this myself, so I can't really offer any advice, except that Youtube is your friend. I'm sure you can find several step-by-step videos that will tell you exactly what you need and show you how to do it.

Dunit35 12-23-2012 12:08 AM
I have one spent shell casing .223 rnd. I'll let it go for $50. Only been reloaded 3 times.

CrazyPhuD 12-23-2012 12:28 AM
Quote:
Originally Posted by Dunit35 (Post 9233643)
I have one spent shell casing .223 rnd. I'll let it go for $50. Only been reloaded 3 times.
Does it come prelubed?

LiveSteam 12-23-2012 01:26 AM
Ill take it

verbaljitsu 12-23-2012 01:37 AM
Quote:
Originally Posted by doomy3 (Post 9233565)
Has anyone here ever assembled an upper from a stripped upper receiver? I picked up a stripped upper today, and I can't find a great guide that outlines exactly what parts I need to pick up to assemble it. Anyone have any recommendations of somewhere that lists exactly what I need to pick up to build this out? I assembled a lower with a parts kit, but I'm not finding anything like that for the upper.
It isnt that tough but you really need some tools. A vice block (and vice to put it in) and an armorers wrench are musts.

Youll need:
Barrel (with gas port drilled)
flashider/comp if barrel is threaded
gas block /front sight base
gas tube
bolt
bolt carrier group
charging handle
forward assist assembly
dust cover
Handguards/tube/rails
depending on handguard etc, retaining ring
Feed ramps

verbaljitsu 12-23-2012 01:45 AM
Also, I forgot the barrel nut

R8RFAN 12-23-2012 08:07 AM
Quote:
Originally Posted by Dunit35 (Post 9221372)
Anybody use a snub nose as a ccw?
Sometimes...Taurus CIA 850

http://www.gilbertsguns.com/producti...5451.small.jpg

notorious 12-23-2012 09:32 AM
Quote:
Originally Posted by R8ers (Post 9233835)
This, with the Crimson Trace handle.

I LOVE my 642. It is the perfect CC gun.

R8RFAN 12-23-2012 09:34 AM
Quote:
Originally Posted by notorious (Post 9233932)
This, with the Crimson Trace handle.

I LOVE my 642. It is the perfect CC gun.
I bought that gun used for 275 about 2 months ago (CIA 850)for the wife when I work at night. It looks new

notorious 12-23-2012 09:48 AM
Quote:
Originally Posted by R8ers (Post 9233936)
I bought that gun used for 275 about 2 months ago (CIA 850)for the wife when I work at night. It looks new
Good buy, a new one runs 350 discounted.

My wife carries a LC9, and I am NOT a fan.

R8RFAN 12-23-2012 09:52 AM
Quote:
Originally Posted by notorious (Post 9233966)
Good buy, a new one runs 350 discounted.

My wife carries a LC9, and I am NOT a fan.
My wife has problems racking a Semi...(small weak hands that are not good with guns but excellent for my..) So she prefers a revolver :)

notorious 12-23-2012 10:01 AM
Quote:
Originally Posted by R8ers (Post 9233978)
My wife has problems racking a Semi...(small weak hands that are not good with guns but excellent for my..) So she prefers a revolver :)
LMAO

InChiefsHeaven 12-28-2012 10:19 AM
Question: I just bought a Taurus PT1911 and took it out shooting last night. ****ing thing was all over the target. Now, I'm not the greatest shot in the world, but I've shot the 1911 before (rented it from the range) and had great success with it. I love the gun, but I can't believe how erratic it shoots. Kentucky windage made no difference. Is this common with a new gun? I was advised to take it apart and clean the shit out of it before shooting it, which I did. Maybe I didn't do a good enough job of cleaning it?

At any rate, before I even try to adjust the sites, I figured I'd ask about it from the resident gun experts here on CP.

notorious 12-28-2012 10:24 AM
Quote:
Originally Posted by InChiefsHell (Post 9245698)
Question: I just bought a Taurus PT1911 and took it out shooting last night. ****ing thing was all over the target. Now, I'm not the greatest shot in the world, but I've shot the 1911 before (rented it from the range) and had great success with it. I love the gun, but I can't believe how erratic it shoots. Kentucky windage made no difference. Is this common with a new gun? I was advised to take it apart and clean the shit out of it before shooting it, which I did. Maybe I didn't do a good enough job of cleaning it?

At any rate, before I even try to adjust the sites, I figured I'd ask about it from the resident gun experts here on CP.
I would tell you to break it in, but every 1911 I have ever shot didn't need to.

Ammo can have a profound affect on accuracy. If you left a lot of oil in the barrel that can affect accuracy.

You might just have a shit barrel.


All times are GMT -6. The time now is 02:32 PM.
Page 205 of 503 « First 105155195201202203204 205 206207208209215255305 Last »
Show 80 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2024, vBulletin Solutions, Inc.