ChiefsPlanet

ChiefsPlanet (https://chiefsplanet.com/BB/index.php)
-   Media Center (https://chiefsplanet.com/BB/forumdisplay.php?f=2)
-   -   Computers Simplex3's SuSE Linux Converts Thread (https://chiefsplanet.com/BB/showthread.php?t=137925)

Simplex3 03-26-2006 11:37 AM

Quote:

Originally Posted by dirk digler
It sounds good and they should use it. They need to use something to demo it out before going and screwing up their PC. That is all that I am saying.

The one thing that I like about VMWare Workstation is that you can practice installing it and configuring without messing up your PC. Unless you have an extra PC at your house that you don't care about I would recommend it.

Just my .02 cents.

The downside to VMWare "install training", so to speak, is that it leaves out getting the partitioning right (Zach's problem), and driver and dual boot issues (kcciefsguru's problem).

Simplex3 03-26-2006 11:41 AM

Quote:

Originally Posted by SLAG02
I have about 8 Gigs Free on my Desktop and 4 gigs free on my Laptop

I need a constant 8-10gigs free on my Desktop to use when I edit my home movies and xfer them to DVD- on a tanget what program would emulate NERO VISION or WINDOWS MOVIE MAKER on linux-


I cant download any ISO's til Monday im On Dial up until then

You're pretty much out of luck for the desktop. You could potentially use the laptop but you'd be pretty pressed for space. I'd say check out the Mepis LiveCD.

http://www.mepis.org/

dirk digler 03-26-2006 11:41 AM

Quote:

Originally Posted by Simplex3
The downside to VMWare "install training", so to speak, is that it leaves out getting the partitioning right (Zach's problem), and driver and dual boot issues (kcciefsguru's problem).

Good point.

I am going to try it out Suse and I am downloading it now. It looks promising.

SLAG 03-26-2006 11:46 AM

Quote:

Originally Posted by Simplex3
You're pretty much out of luck for the desktop. You could potentially use the laptop but you'd be pretty pressed for space. I'd say check out the Mepis LiveCD.

http://www.mepis.org/


I may just wait another week


I get paid on friday and a new HDD for the Desktop is in order anyway..

Any suggestions on where to get a good one for under $100


EDIT: I dont think my MainBoard supports SATA I need an EIDE

Simplex3 03-26-2006 11:49 AM

Quote:

Originally Posted by SLAG02
I may just wait another week


I get paid on friday and a new HDD for the Desktop is in order anyway..

Any suggestions on where to get a good one for under $100


EDIT: I dont think my MainBoard supports SATA I need an EIDE

Microcenter has several under $100.
http://www.microcenter.com/search_re...3327416386986c

007 03-26-2006 11:50 AM

Quote:

Originally Posted by Simplex3
1. At least when you have issues it's possible to fix them
2. All of this information is readily available in the user's guide and on the web
3. You didn't do all of this s**t by yourself the first time you used Windows
4. You couldn't mount a non-Windows drive in Windows with or without the help of an expert

...and last but not least...

5. F**K OFF, TROLL

[edit] While we're at it, when was the last time you had Windows, all your drivers, AND all your apps installed and patched in under 3 hours? That's right, NEVER. Feel free to never stop by again.[/edit]

Got this

linux:/home/rmstewart # kate /etc/fstab
Session management error: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed
kbuildsycoca running...
Session management error: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed
ASSERT: "m_currentContainer==container" in ./kate/app/kateviewmanager.cpp (196)
linux:/home/rmstewart # QObject::connect: No such signal KListView::doubleclicked(QListViewItem*)
QObject::connect: (sender name: 'unnamed')
QObject::connect: (receiver name: 'KateSaveModifiedDialog')
Session management error: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed

linux:/home/rmstewart # mkdir -p /windows/d
linux:/home/rmstewart # ICE default IO error handler doing an exit(), pid = 6852, errno = 0
mount /windows/d
mount: can't find /windows/d in /etc/fstab or /etc/mtab

Simplex3 03-26-2006 11:56 AM

Quote:

Originally Posted by kcchiefsguru
Got this

linux:/home/rmstewart # kate /etc/fstab
Session management error: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed
kbuildsycoca running...
Session management error: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed
ASSERT: "m_currentContainer==container" in ./kate/app/kateviewmanager.cpp (196)
linux:/home/rmstewart # QObject::connect: No such signal KListView::doubleclicked(QListViewItem*)
QObject::connect: (sender name: 'unnamed')
QObject::connect: (receiver name: 'KateSaveModifiedDialog')
Session management error: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed

linux:/home/rmstewart # mkdir -p /windows/d
linux:/home/rmstewart # ICE default IO error handler doing an exit(), pid = 6852, errno = 0
mount /windows/d
mount: can't find /windows/d in /etc/fstab or /etc/mtab

Ok, first I think you're still using the LiveCD, right? We can't add drivers or mount points to the LiveCD because it's a read only device. If that's not the case let me know.

Second, Linux is case-sensitive. "d" is not the same thing as "D". That takes some time for most Windows users to get used to.

SLAG 03-26-2006 11:57 AM

Quote:

Originally Posted by Simplex3
Microcenter has several under $100.
http://www.microcenter.com/search_re...3327416386986c

Im Leary to buy an Refurbished HDD

id buy an Refurbished anything else but a HDD seems iffy to me Refurbed

007 03-26-2006 12:00 PM

Quote:

Originally Posted by Simplex3
Ok, first I think you're still using the LiveCD, right? We can't add drivers or mount points to the LiveCD because it's a read only device. If that's not the case let me know.

Second, Linux is case-sensitive. "d" is not the same thing as "D". That takes some time for most Windows users to get used to.


NOt using the live cd at all.
Also, I am cutting and pasting exactly what you type.

007 03-26-2006 12:02 PM

hmm now my status bar at the bottom will not display anything.

Simplex3 03-26-2006 12:04 PM

Quote:

Originally Posted by kcchiefsguru
NOt using the live cd at all.
Also, I am cutting and pasting exactly what you type.

Run this for me:

Code:

ls -l /windows/

007 03-26-2006 12:08 PM

Quote:

Originally Posted by Simplex3
Run this for me:

Code:

ls -l /windows/

total 9
drwxr-xr-x 4 root root 96 2006-03-26 11:48 .
drwxr-xr-x 22 root root 512 2006-03-26 06:06 ..
drwxr-xr-x 2 root root 48 2006-03-26 11:48 d
dr-xr-xr-x 1 root users 8192 2006-03-25 22:31 D

Simplex3 03-26-2006 12:11 PM

Quote:

Originally Posted by kcchiefsguru
total 9
drwxr-xr-x 4 root root 96 2006-03-26 11:48 .
drwxr-xr-x 22 root root 512 2006-03-26 06:06 ..
drwxr-xr-x 2 root root 48 2006-03-26 11:48 d
dr-xr-xr-x 1 root users 8192 2006-03-25 22:31 D

Ok, we're in good shape. Run this as root:
Code:

mount /windows/D
Also, did you get the NVidia driver running?

007 03-26-2006 12:13 PM

Quote:

Originally Posted by Simplex3
Ok, we're in good shape. Run this as root:
Code:

mount /windows/D
Also, did you get the NVidia driver running?

mount: /dev/hda5 already mounted or /windows/D busy
mount: according to mtab, /dev/hda5 is already mounted on /windows/D


yes, Nvidia is up and running.

my status bar at the bottom of my Gnome screen is bare and will not display anything though now.

Simplex3 03-26-2006 12:21 PM

Quote:

Originally Posted by kcchiefsguru
mount: /dev/hda5 already mounted or /windows/D busy
mount: according to mtab, /dev/hda5 is already mounted on /windows/D


yes, Nvidia is up and running.

my status bar at the bottom of my Gnome screen is bare and will not display anything though now.

Ah, you're in Gnome? Ok, that explains why media:/ didn't work. ROFL

Ok, so show me this:
Code:

ls -l /windows/D/
I'm not a Gnome guy, I'm not sure what the deal with the panel is.


All times are GMT -6. The time now is 07:39 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2025, vBulletin Solutions, Inc.