Beryllium and its salts are toxic substances and potentially carcinogenic. Chronic berylliosis is a pulmonary and systemic granulomatous disease caused by exposure to beryllium. Acute beryllium disease in the form of chemical pneumonitis was first reported in Europe in 1933 and in the United States in 1943. Cases of chronic berylliosis were first described in 1946 among workers in plants manufacturing fluorescent lamps in Massachusetts. Chronic berylliosis resembles sarcoidosis in many respects, and the differential diagnosis is often difficult.
Although the use of beryllium compounds in fluorescent lighting tubes was discontinued in 1949, potential for exposure to beryllium exists in the nuclear and aerospace industries and in the refining of beryllium metal and melting of beryllium-containing alloys, the manufacturing of electronic devices, and the handling of other beryllium-containing material.

Early researchers tasted beryllium and its various compounds for sweetness in order to verify its presence. Modern diagnostic equipment no longer necessitates this highly risky procedure and no attempt should be made to ingest this substance. Beryllium and its compounds should be handled with great care and special precautions must be taken when carrying out any activity which could result in the release of beryllium dust (lung cancer is a possible result of prolonged exposure to beryllium laden dust).

This substance can be handled safely if certain procedures are followed. No attempt should be made to work with beryllium before familiarization with correct handling procedures.

Discovery of Beryllium

444444444444Discovery of the element in the mineral beryl, was reported by Nicolas Louis Vauquelin in 1789.

Commercial value of Beryllium

1969 Bertrandite mine established in the United States providing a significant raw materials source

1977 Effects of inflation rates, increased energy costs, and additional costs associated with complying with air emission

standards results in increased prices

1979 Beryllium metal price set by one producer

1988 Purchase of beryllium metal for the National Defense Stockpile (NDS)

1990 Conversion of NDS beryl ore to beryllium metal for the NDS

1991 Recession, dissolution of the Soviet Union



Beryllium found in nature

Pure beryllium is not found in nature. Beryllium compounds can be found in mineral rocks, soil, coal, oil, and volcanic dust.

(ball of beryllium below)

(diagram of a beryllium atom)



Properties of Beryllium
Beryllium is a toxic bivalent element, steel gray, strong, light-weight, primarily used as hardening agent in alloys. Beryllium has one of the highest melting points of the light metals. It has excellent thermal conductivity, is nonmagnetic, it resists attack by concentrated nitric acid and at standard temperature and pressures beryllium resist oxidation when exposts to air.



Beryllium is used as an alloying agent in the production of beryllium-copper. Thanks to their electrical and thermal conductivity, high strenght and hardness, non magnetic properties, good resistance, dimensional stability over a wide temperature range beryllium-copper alloys are used in many applications. A typical application of beryllium-copper alloys is in the defense and aerospace industries.
Beryllium is also used in the field of X-ray detection diagnostic (it is transparent to X-rays) and in the making of various computer equipment.
1969 Bertrandite mine established in the United States providing a significant raw materials source

1977 Effects of inflation rates, increased energy costs, and additional costs associated with complying with air emission

standards results in increased prices

1979 Beryllium metal price set by one producer

1988 Purchase of beryllium metal for the National Defense Stockpile (NDS)

1990 Conversion of NDS beryl ore to beryllium metal for the NDS

1991 Recession, dissolution of the Soviet Union

Beryllium found in nature

Pure beryllium is not found in nature. Beryllium compounds can be found in mineral rocks, soil, coal, oil, and volcanic dust.

Properties of Beryllium
Beryllium is a toxic bivalent element, steel gray, strong, light-weight, primarily used as hardening agent in alloys. Beryllium has one of the highest melting points of the light metals. It has excellent thermal conductivity, is nonmagnetic, it resists attack by concentrated nitric acid and at standard temperature and pressures beryllium resist oxidation when exposts to air.

Beryllium is used as an alloying agent in the production of beryllium-copper. Thanks to their electrical and thermal conductivity, high strenght and hardness, non magnetic properties, good resistance, dimensional stability over a wide temperature range beryllium-copper alloys are used in many applications. A typical application of beryllium-copper alloys is in the defense and aerospace industries.
Beryllium is also used in the field of X-ray detection diagnostic (it is transparent to X-rays) and in the making of various computer equipment.

Standard state: solid at 298 K

Colour: lead grey

Classification: Metallic

Availability:
beryllium is available in several forms including foil, lump, and powder. Small and large samples of beryllium foil can be purchased from Advent Research Materials via their web catalogue.

Beryllium is a Group 2 (IIA) element. At ordinary temperatures, beryllium resists oxidation in air. Its ability to scratch glass is probably due to the formation of a thin layer of the oxide. Aquamarine and emerald are precious forms of the mineral beryl, [Be3Al2(SiO3)6].

---------------------------------------
-------------
---------- Uses
--of
-
-
-
-
---------------------Beryllium

Beryllium is used as an alloying agent in the production of beryllium-copper because of its ability to absorb large amounts of heat. Beryllium-copper alloys are used in a wide variety of applications because of their electrical and thermal conductivity, high strength and hardness, nonmagnetic properties, along with good corrosion and fatigue resistance.

These applications include the making of spot-welding electrodes, springs, non-sparking tools and electrical contacts.

Due to their stiffness, light weight, and dimensional stability over a wide temperature range, beryllium-copper alloys are also used in the defense and aerospace industries as light-weight structural materials in high-speed aircraft, missiles, space vehicles and communication satellites.

Thin sheets of beryllium foil are used with X-ray detection diagnostics to filter out visible light and allow only X-rays to be detected.

Beryllium is an effective p-type dopant in III-V compound semiconductors. It is widely used in materials such as GaAs, AlGaAs, InGaAs, and InAlAs grown by molecular beam epitaxy (MBE).

In the field of X-ray lithography beryllium is used for the reproduction of microscopic integrated circuits.

In the telecommunications industry, Beryllium is made into tools that are used to tune the highly magnetic klystrons used for high power microwave transmissions for safety.

Because it has a low thermal neutron absorption cross section, the nuclear power industry uses this metal in nuclear reactors as a neutron reflector and moderator.
Beryllium is used in nuclear weapons for similar reasons.

For example, the critical mass of a plutonium sphere is significantly reduced if the plutonium is surrounded by a beryllium shell.

Beryllium is sometimes used in neutron sources, in which the beryllium is mixed with an alpha emitter such as 210Po, 226Ra, 239Pu or 241Am.

Beryllium is also used in the making of gyroscopes, various computer equipment, watch springs and instruments where light-weight, rigidity and dimensional stability are needed.

Beryllium oxide is useful for many applications that require an excellent heat conductor, with high strength and hardness, with a very high melting point, and that acts as an electrical insulator.

Beryllium compounds were once used in fluorescent lighting tubes, but this use was discontinued because of berylliosis in the workers manufacturing the tubes

The James Webb Space Telescope[3] will have 18 hexagonal beryllium sections for its mirrors.

Because JWST will face a temperature of −240 degrees Celsius (30 kelvins), the mirror is made of beryllium, a material capable of handling extreme cold better than glass.

Beryllium contracts and deforms less than glass — and thus remains more uniform — in such temperatures.

Beryllium is also used in the Joint European Torus fusion research facility, to condition the plasma facing components.[4]

Beryllium has also been used in tweeter construction by the company Focal-JMlab on its flagship Utopia Be series as an alternative to titanium and aluminium, largely due to its lower density and greater rigidity.[5]

From this sweet salt,
I will make you emeralds
and aquamarine. From this
pale metal, I will forge you
glass that will not melt.

Let me take this sweet
bivalent and make of it
an instrument that spins
to tell us where we are.
Let me form a cord of it

to run between your lips
and mine, so we can talk
to one another faster
than sound has ever
traveled before.

I got an atomic number of 4
And I am quite a bore
I’m not very fast
But I sure can scratch glass

I am from the Greek
And once referred to as sweet
I am very light-weight
So please, don’t use me as a paper weight

Name: Beryllium

Symbol: Be

Atomic Number: 4

Atomic Weight: 9.012182

Family: Alkaline Earth Metals

CAS RN: 7440-41-7

Description: Strong, hard, gray-white metal. Lightest rigid metal. Formerly called glucinium (Gl).

State (25°C): Solid

Oxidation states: +2

Molar Volume: 4.88 cm3/mole

Valence Electrons: 2s2

Boiling Point: 3243°K, 2970°C, 5378°F

Melting Point: 1551°K, 1278°C, 2332°F

Electrons Energy Level: 2, 2

Heat of Vaporization: 292.4 kJ/mol

Heat of Fusion: 12.2 kJ/mol

Density: 1.848 g/cm3 @ 300°K

Specific Heat: 1.82 J/g°K

Atomic Radius: 1.4Å

Ionic Radius: 0.35Å

Electronegativity: 1.57 (Pauling); 1.47 (Allrod Rochow)

cheater!

Light metal

Light metals are metals of low atomic weight.

The cut off between light metals and heavy metals varies.

Lithium, beryllium, sodium, magnesium and aluminium are almost always included. Additional metals up to nickel are often included as well.

Metals heavier than nickel are usually called heavy metals. Light metals are generally less toxic than heavy metals.

Beryllium is toxic, but it is rarely found in large concentrations. Vanadium, not always counted as a light metal, is also toxic. Other light metals are toxic in large amounts.

General properties

Name, symbol, number beryllium, Be, 4

Pronunciation /bəˈrɪliəm/ bə-RIL-ee-əm

Element category alkaline earth metal

Group, period, block 2, 2, s

Standard atomic weight 9.012182g·mol−1

Electron configuration 1s2 2s2

Electrons per shell 2, 2 (Image)

Physical properties

Phase solid

Density (near r.t.) 1.85 g·cm−3

Liquid density at m.p. 1.690 g·cm−3

Melting point 1560 K, 1287 °C, 2349 °F

Boiling point 2742 K, 2469 °C, 4476 °F