ChiefsPlanet

ChiefsPlanet (https://www.chiefsplanet.com/BB/index.php)
-   Nzoner's Game Room (https://www.chiefsplanet.com/BB/forumdisplay.php?f=1)
-   -   Chiefs Your Best Smoked Brisket Recipe (https://www.chiefsplanet.com/BB/showthread.php?t=269592)

houstonwhodat 02-01-2013 05:52 PM

Quote:

Originally Posted by Phobia (Post 9371268)
I've seen the criticisms and I've been watching. He starts a few threads and it's more than the average bear but he's not starting total crap. If he gets out of line, we'll nip it in the bud but so far, he's legit.


Thank you.

I enjoy the hell out of this board. It's the best one in the country.

Other boards put a 4 thread per day max so that's my benchmark.

I only put something up if I think you guys might be entertained or in this case can give me some good advice.

FlaChief58 02-01-2013 05:52 PM

Quote:

Originally Posted by Inmem58 (Post 9371276)
He's wanting a recipe for brisket not ribs, ya jack wagon

That's just a link to the site dumbass

In58men 02-01-2013 05:53 PM

Quote:

Originally Posted by Flachief58 (Post 9371292)
That's just a link to the site dumbass

Well send a ****in link to brisket not ribs, stupid mother bitch

candyman 02-01-2013 05:53 PM

Quote:

Originally Posted by Fire Me Boy! (Post 9371282)
He's not.

lol good...Im still a n00b, still trying to figure out who the trolls are :)

Fire Me Boy! 02-01-2013 05:54 PM

Quote:

Originally Posted by DJ's left nut (Post 9371270)
They're hard to screw up.

225, 2 fist sized chunks of cherry, 1 fist sized chunk of oak and a shitload of patience. I've seen some people say to put it on at room temperature but I add it straight from the fridge. I think the lower temp gives you a little more time in the smoke and a slightly better smoke ring before you hit that 145ish range where it stops accepting the smoke flavor.

I use a mustard coating and a dry rub that's light brown sugar, paprika, cayenne, mustard powder, black pepper, garlic powder and kosher salt. Use a LOT of rub, it mellows with the smoke. As for the ratio, I honestly don't remember, I just do it to taste. The garlic, black pepper and brown sugar probably make up 70% of the rub with the paprika making up the biggest chunk of the rest. I don't use a ton of salt and the cayenne is obviously as desired.

Some guys will swear by putting the fat side up claiming the juice permeates the meat better. Others will say that the juice mostly runs off and that you want to put the fat side down to protect from the more volatile heat zone directly between the water pan and the meat (or heat and meat if you don't use a water pan).

Some guys use a mop, I personally do not (not on beef). I just don't like beef having too much sweetness and I don't think a vinegar mop for beef. If you're curious, just google 'brisket mop' and you can find some recipes you may like.

Like I said, they're pretty hard to mess up.

This is a pretty good start. For a brisket rub, stay fairly light on sugar. Your brisket will be in the smoker too long and the sugar will get bitter. Some is OK, too much is bad. I frankly don't care for sugar in a brisket rub. Great on ribs, though.

Here's a couple good basic rubs on Food Network. I've tried both of them, and they're pretty standard.

http://www.foodnetwork.com/recipes/f...ipe/index.html

http://www.foodnetwork.com/recipes/b...ipe/index.html

The practice of rubbing the whole brisket down with mustard, then applying the rub is 100 percent spot on. As for a baste - I don't do a lot, but I'll pour a bottle of beer in a spray bottle and spritz it a few times.

FlaChief58 02-01-2013 05:55 PM

Quote:

Originally Posted by Inmem58 (Post 9371294)
Well send a ****in link to brisket not ribs, stupid mother bitch

Why, because you're too stupid to scroll to the bottom of the page and click on the brisket tips?

Fire Me Boy! 02-01-2013 05:56 PM

Quote:

Originally Posted by candyman (Post 9371296)
lol good...Im still a n00b, still trying to figure out who the trolls are :)

If memory serves, there's a board regular that boils his ribs first. It's ChiefsPlanet lexicon, right up there with the people that roast their Thanksgiving turkeys in a bag.

Welcome to CP, candyman. :thumb:

houstonwhodat 02-01-2013 05:56 PM

Quote:

Originally Posted by DJ's left nut (Post 9371270)
They're hard to screw up.

225, 2 fist sized chunks of cherry, 1 fist sized chunk of oak and a shitload of patience. I've seen some people say to put it on at room temperature but I add it straight from the fridge. I think the lower temp gives you a little more time in the smoke and a slightly better smoke ring before you hit that 145ish range where it stops accepting the smoke flavor.

I use a mustard coating and a dry rub that's light brown sugar, paprika, cayenne, mustard powder, black pepper, garlic powder and kosher salt. Use a LOT of rub, it mellows with the smoke. As for the ratio, I honestly don't remember, I just do it to taste. The garlic, black pepper and brown sugar probably make up 70% of the rub with the paprika making up the biggest chunk of the rest. I don't use a ton of salt and the cayenne is obviously as desired.

Some guys will swear by putting the fat side up claiming the juice permeates the meat better. Others will say that the juice mostly runs off and that you want to put the fat side down to protect from the more volatile heat zone directly between the water pan and the meat (or heat and meat if you don't use a water pan).

Some guys use a mop, I personally do not (not on beef). I just don't like beef having too much sweetness and I don't think a vinegar mop for beef. If you're curious, just google 'brisket mop' and you can find some recipes you may like.

Like I said, they're pretty hard to mess up.



Questions:

Does the sugar burn? Maybe I want that crust don't know.

How many hours or did you leave a thermometer in it the whole time.

DJ's left nut 02-01-2013 05:56 PM

Yeah. If I could ever figure out a way to get the crust I want without adding the brown sugar, I'd do it. But I've always had far more luck getting a bark by using brown sugar in the rub.

I'm sure it's a technique error, but that's part of the process, I s'pose.

candyman 02-01-2013 05:56 PM

Quote:

Originally Posted by Fire Me Boy! (Post 9371299)
This is a pretty good start. For a brisket rub, stay fairly light on sugar. Your brisket will be in the smoker too long and the sugar will get bitter.

He has a kettle not a smoker. He's probably not going to be going low and slow.

Quote:

Originally Posted by Fire Me Boy! (Post 9371304)
If memory serves, there's a board regular that boils his ribs first. It's ChiefsPlanet lexicon, right up there with the people that roast their Thanksgiving turkeys in a bag.

Welcome to CP, candyman. :thumb:

Thanks :thumb:

In58men 02-01-2013 05:57 PM

Quote:

Originally Posted by Flachief58 (Post 9371303)
Why, because you're too stupid to scroll to the bottom of the page and click on the brisket tips?

http://img.tapatalk.com/d/13/02/02/avyrysas.jpg

DJ's left nut 02-01-2013 05:58 PM

Quote:

Originally Posted by houstonwhodat (Post 9371305)
Questions:

Does the sugar burn? Maybe I want that crust don't know.

How many hours or did you leave a thermometer in it the whole time.

FMB kinds spoke to that. Yes, it can. However, it's been my experience that it really doesn't at 225. That's a pretty low heat and more than anything, it just kinda liquifies.

As to the time - boy I don't have much to offer there and whatever I did would be wrong. I say don't ever expect anything to cook in less than 8 hours. I don't leave a probe in (I leave that on the grate to check the heat in the chamber), but every couple of hours I'll just hit it with the instant read to get a feel for where it is.

KCUnited 02-01-2013 05:58 PM

I would worry less about your rub and more about how you're going to keep your kettle at 225 for a pound/pound and a half an hour.

Personally, if I were doing a brisket in a kettle, which I never would, but if it were some weird challenge on some bbq show or something, I would do it at a higher heat for less time.

Fire Me Boy! 02-01-2013 05:59 PM

Quote:

Originally Posted by candyman (Post 9371309)
He has a kettle not a smoker. He's probably not going to be going low and slow.

Build the fire on one side, close down the vents, put a water pan on the other side with some water in it, brisket over the water pan, and he absolutely can go low and slow.

candyman 02-01-2013 06:00 PM

Its going to be hard to do a brisket right on a kettle, unless you can figure out a way to keep the temp down. You really need some sort of water pan. I wouldnt use much sugar, if any at all because more than likely in a kettle it will burn.

EDIT: FMB is way ahead of me, that would probably work if you have a water pan.


All times are GMT -6. The time now is 12:21 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2024, vBulletin Solutions, Inc.