Network

[Boon]

I have a wireless router that several PCs in the house share.
My main PC runs Windows 7 and I have Linux Mint on another.

Can I set up a network between these two machines that would allow me to exchange files
back and forth?

[htismaqe]

What kind of router do you have? Is it a newer router with a USB port?

[bishop_74]

Samba works well for me

[htismaqe]

Samba works well for a lot of people. We need to know more about his setup before we make that decision though.

[Boon]

Originally Posted by htismaqe

What kind of router do you have? Is it a newer router with a USB port?

No. It's an older model. No USB port. Linksys I think.

[htismaqe]

Originally Posted by Boon

No. It's an older model. No USB port. Linksys I think.

How comfortable are you with Linux?

Setting up your file share on the Linux box would probably be more stable and perform better - you could use Samba for Windows compatibility.

However, setting up a file share on the Windows box is just a couple of check marks. The Linux box should be able to see a CIFS/SMB share just fine but Windows workstation OS doesn't always make the best file share.

[Boon]

Originally Posted by htismaqe

How comfortable are you with Linux?

Setting up your file share on the Linux box would probably be more stable and perform better - you could use Samba for Windows compatibility.

However, setting up a file share on the Windows box is just a couple of check marks. The Linux box should be able to see a CIFS/SMB share just fine but Windows workstation OS doesn't always make the best file share.

Thanks for the help. Unfortunately a lot of this doesn't make sense to me. Before I put Linux on the box, I had XP and I was able to move files from one to another. I think I had to make the workgroup setting "Workgroup" on both boxes. When I loook at network settings in Linux I can see the drives on the drives on the Win7 box. I tried to right click the icon and connect to one. It keeps asking for a password, I enter it and nothing. As I say, I know little about networking, etc.

[htismaqe]

Originally Posted by Boon

Thanks for the help. Unfortunately a lot of this doesn't make sense to me. Before I put Linux on the box, I had XP and I was able to move files from one to another. I think I had to make the workgroup setting "Workgroup" on both boxes. When I loook at network settings in Linux I can see the drives on the drives on the Win7 box. I tried to right click the icon and connect to one. It keeps asking for a password, I enter it and nothing. As I say, I know little about networking, etc.

By default, Windows is going to use local authentication.

On your Linux box, open the drive like you did and when it prompts you for a username and password, type in your WINDOWS username and password (the one you use to login to the Windows machine) rather than the login you use on the Linux box itself.

[Boon]

Originally Posted by htismaqe

By default, Windows is going to use local authentication.

On your Linux box, open the drive like you did and when it prompts you for a username and password, type in your WINDOWS username and password (the one you use to login to the Windows machine) rather than the login you use on the Linux box itself.

I have done this in Linux and it just keeps throwing up the same dialog box.
Enter name and password.

I have double checked the name/password but it won't access the drive. I am lost???

[htismaqe]

Originally Posted by Boon

I have done this in Linux and it just keeps throwing up the same dialog box.
Enter name and password.

I have double checked the name/password but it won't access the drive. I am lost???

Follow the instructions here:

http://www.dummies.com/how-to/conten...Id-397922.html

Setup a unique user on that shared folder called "linux" or something similar and then try it again.

Windows can be kind of wonky.

[carcosa]

Thought this was going to be about the Chayefsky film.

[TribalElder]

Originally Posted by bishop_74

Samba works well for me

This

If you are only copying files then use winscp over ssh

[TheUte]

Originally Posted by htismaqe

By default, Windows is going to use local authentication.

On your Linux box, open the drive like you did and when it prompts you for a username and password, type in your WINDOWS username and password (the one you use to login to the Windows machine) rather than the login you use on the Linux box itself.

The User you should be using is actually "computername\Username".

It tells the machine you connecting to that you are using a local account.

[htismaqe]

Originally Posted by TheUte

The User you should be using is actually "computername\Username".

It tells the machine you connecting to that you are using a local account.

Ah yes. It's been so long since I've actually used Windows.

Good catch!