Home Discord Chat
Go Back   ChiefsPlanet > Nzoner's Game Room

Reply
 
Thread Tools Display Modes
Old 01-31-2017, 09:01 PM  
HemiEd HemiEd is offline
The only constant is change
 
HemiEd's Avatar
 
Join Date: Dec 2004
Location: Ozarks
Casino cash: $3580564
Woodworking

I don't recall seeing anything on here about the hobby. Do you do it? Have any interest? Tools? Have you made anything? Do you want to learn?

With the recent developments on the Planet, it got me thinking, what can I do to contribute and support the new effort?

I had no problem with any of the old guard and want to support the effort to make Chiefs Planet great again with the regime.


They aren't teaching vocational training in high school anymore, but maybe we can provide a venue here to learn woodworking?

There is a handyman mega thread, but this deserves it's own thread if we are going to accomplish something.

When I went to Junior high school we had woodworking class and I have always loved it. Finally, upon retirement, I have been able to set up a nice woodwork shop. I can go from station to station and perform the particular task, planing, jointer, sander, router table, radial arm, table and band saw.

I am currently on my fifth cedar chest this winter. Each one has gotten much easier as I have learned.

We have a cedar mill about ten miles away so it has been very instrumental in the effort as raw material is the main ingredient. It is dirt cheap at the mill and I have been buying 1.1 inch thick by 52 long by 4.25 wide boards and gluing them together.

What are you working on?
Posts: 33,337
HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.
    Reply With Quote
Old 02-01-2017, 09:22 PM   #106
Buzz Buzz is offline
I like Pie!
 

Join Date: Jan 2004
Location: In my garage
Casino cash: $10016623
Quote:
Originally Posted by Bugeater View Post
I'm using the engineered vinyl in my kitchen as well, but it has a tile look vs the wood look.

Show me the way, what are you going with? Sorry, didn't mean to derail the thread. I'm sure it will get back on track.
Posts: 5,383
Buzz is obviously part of the inner Circle.Buzz is obviously part of the inner Circle.Buzz is obviously part of the inner Circle.Buzz is obviously part of the inner Circle.Buzz is obviously part of the inner Circle.Buzz is obviously part of the inner Circle.Buzz is obviously part of the inner Circle.Buzz is obviously part of the inner Circle.Buzz is obviously part of the inner Circle.Buzz is obviously part of the inner Circle.Buzz is obviously part of the inner Circle.
    Reply With Quote
Old 02-01-2017, 09:36 PM   #107
Chiefshrink Chiefshrink is offline
Replaced by a future HOFer !!
 
Chiefshrink's Avatar
 

Join Date: Apr 2002
Location: donkey land
Casino cash: $6927901
Quote:
Originally Posted by D2112 View Post
Nice work Ed!! I haven't done that stuff since wood shop in junior high back in the (gulp) 70's
Same here.
__________________
Quote:
Originally Posted by DaneMcCloud View Post
but I'll really need to think before speaking
Quote:
Originally Posted by Titty Meat View Post
I can't ****ing wait to see this dudes meat.
Quote:
Originally Posted by Hammock Parties View Post
i think my favorite post in the thread is me
Posts: 26,972
Chiefshrink is obviously part of the inner Circle.Chiefshrink is obviously part of the inner Circle.Chiefshrink is obviously part of the inner Circle.Chiefshrink is obviously part of the inner Circle.Chiefshrink is obviously part of the inner Circle.Chiefshrink is obviously part of the inner Circle.Chiefshrink is obviously part of the inner Circle.Chiefshrink is obviously part of the inner Circle.Chiefshrink is obviously part of the inner Circle.Chiefshrink is obviously part of the inner Circle.Chiefshrink is obviously part of the inner Circle.
    Reply With Quote
Old 02-01-2017, 10:36 PM   #108
Bugeater Bugeater is offline
The Maintenance Guy
 
Bugeater's Avatar
 

Join Date: Sep 2005
Location: Renovated Bugeater Estate
Casino cash: $6302680
Quote:
Originally Posted by Buzz View Post
Show me the way, what are you going with? Sorry, didn't mean to derail the thread. I'm sure it will get back on track.
http://www.efloors.com/usfloors-core...alog_53430.htm
Posts: 70,441
Bugeater is obviously part of the inner Circle.Bugeater is obviously part of the inner Circle.Bugeater is obviously part of the inner Circle.Bugeater is obviously part of the inner Circle.Bugeater is obviously part of the inner Circle.Bugeater is obviously part of the inner Circle.Bugeater is obviously part of the inner Circle.Bugeater is obviously part of the inner Circle.Bugeater is obviously part of the inner Circle.Bugeater is obviously part of the inner Circle.Bugeater is obviously part of the inner Circle.
    Reply With Quote
Old 02-02-2017, 06:08 AM   #109
HemiEd HemiEd is offline
The only constant is change
 
HemiEd's Avatar
 

Join Date: Dec 2004
Location: Ozarks
Casino cash: $3580564
Quote:
Originally Posted by DJ's left nut View Post
That's really what's kept me from doing any kind of involved hardwood work.

I'm just not good at 'merging' stock. I'm sure it has a name, but when it's time to glue some 2x6s together to form a table-top and then smooth it all out to give it a finished look, I always end up with something with too many high spots or grooves or just an otherwise sloppy look.

Part of the problem is a lack of good bar clamps. Jet makes the top of the line ones and on Black Friday you can find the rare discount on them, but man alive they're expensive. So I make due with mediocre pipe clamps and they just don't hold the pieces together well enough. My planer's a 12 inch Porter Cable and it's a nice machine but I was an idiot and ran a piece with nails in it through there without realizing it and took chunks out of my blades so invariably, when I need it, it's not an option. I guess I could just loosen and offset the blades to cover for the chunks but again, lazy and stupid.

.
Do you use biscuits or dowels when merging the stock? I bought a dowel jig and use three spaced evenly and it seems to do the trick. I bought some pretty good long clamps, two 24s and two 36s that have been great. Believe it or not, Walmart has a pretty good little clamp for the small stuff for about three dollars and I have about a dozen of those. I will end up with 10 or so clamps on a piece once it is glued up. Here is a picture with a few clamps on but many more were put on.

My planer is a Dewalt and it says the blades can be reversed. I haven't had to do it yet but the white oak is sure making me think about it.
Attached Thumbnails
Click image for larger version

Name:	glueing1.jpg
Views:	80
Size:	71.7 KB
ID:	113820  
Posts: 33,337
HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.
    Reply With Quote
Old 02-02-2017, 12:31 PM   #110
DJ's left nut DJ's left nut is offline
Sauntering Vaguely Downwards
 
DJ's left nut's Avatar
 

Join Date: Sep 2005
Location: Columbia, Mo
Casino cash: $3289099
Quote:
Originally Posted by HemiEd View Post
Do you use biscuits or dowels when merging the stock? I bought a dowel jig and use three spaced evenly and it seems to do the trick. I bought some pretty good long clamps, two 24s and two 36s that have been great. Believe it or not, Walmart has a pretty good little clamp for the small stuff for about three dollars and I have about a dozen of those. I will end up with 10 or so clamps on a piece once it is glued up. Here is a picture with a few clamps on but many more were put on.

My planer is a Dewalt and it says the blades can be reversed. I haven't had to do it yet but the white oak is sure making me think about it.
Dowels but I don't have a jig or anything; I put them on the press and put a stop in there for depth.

I should just spend a few bucks on a biscuit joiner; I've used one a handful of times and have always been impressed by the results.

Your clamp pattern is useful there, as is the idea of using scrap to form an 'edge' on the ends. I try to do something similar but it's more scattershot. I should probably just get more pipe clamps so I can get a better hold. I don't have a good reason not to; my new bench has a 4x6 work surface so I have plenty of room to operate, especially as my table saw has a nice extension table and my assembly table is my outfeed table so I can 'borrow' space from the cast-iron top on the saw or even the extension table as needed.

I have far more shop/tool than I have the skill for is the bottom line and all I can do to address that is keep failing forward. I was looking to make some mobile tool tables (want to build a new rolling table with folding sides for my slider, for instance) and my buddy just looks at me like I'm an idiot and says "guys with 800 sq foot workshops don't need mobile tools; design your space better".

Oh.
__________________
"If there's a god, he's laughing at us.....and our football team..."

"When you look at something through rose colored glasses, all the red flags just look like flags."
Posts: 59,679
DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.
    Reply With Quote
Old 02-02-2017, 12:37 PM   #111
DJ's left nut DJ's left nut is offline
Sauntering Vaguely Downwards
 
DJ's left nut's Avatar
 

Join Date: Sep 2005
Location: Columbia, Mo
Casino cash: $3289099
I really want to build this:



Looks incredibly practical and since dust collection on any sliding compound miter saw is a trainwreck (unless you find one of those $1,000 jobs like a festool kapex or something), you can build a really nice hood for that rig, put plumbing through the back and run it straight into your dust collection ducts.

Sadly, it just keeps sliding down the project list (and since those Kreg stop kits are expensive as hell, my wife will most assuredly yell at me when I get the pieces for it).
__________________
"If there's a god, he's laughing at us.....and our football team..."

"When you look at something through rose colored glasses, all the red flags just look like flags."
Posts: 59,679
DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.
    Reply With Quote
Old 02-02-2017, 12:48 PM   #112
HemiEd HemiEd is offline
The only constant is change
 
HemiEd's Avatar
 

Join Date: Dec 2004
Location: Ozarks
Casino cash: $3580564
Quote:
Originally Posted by bogey
Love this thread. Thanks for starting it! I had a nice little wood shop for several years. Used to make furniture as a hobby. Love thewoodwhisperer website!
Do you have any pictures of the furniture you made? I will check out that site, thanks.

Quote:
Originally Posted by notorious View Post
You basically water popped the grain.

150 grit is more than enough for most woods. If you want to get Maple or Hickory to stain dark, a mixture of 50/50 denatured alcohol and water will do the trick. Mix it, spray it on (after sanding), and it should be dry in 1/2 hour and ready for stain.

Water popping before stain will allow it to penetrate across the entire board instead of just the grain. Put a heavy sealer and a couple coats of good finish (I use only floor finish, obviously) and you will have a perfectly smooth finished piece that is well protected.

I usually don't like to pop oak too hard because the grain is so open. I usually mix more alcohol in to minimize opening up the grain too much. If you open the grain too much you will get what's called bleedback and the product will look like shit.
I am confused as to what you mean about water popping the wood? The quote you quoted of me I had already put the polyurethane on and had used the 400.600 then 1000 prior to buffing it out. Kind of like color sanding and buffing out the paint on a car.

The white oak I bought is hard as heck and very tight compared to the cedar. The last real woodwork I have done was over 50 years ago in school and it was all mahogany.

Thanks for your input.


Quote:
Originally Posted by DJ's left nut View Post
Dowels but I don't have a jig or anything; I put them on the press and put a stop in there for depth.

I should just spend a few bucks on a biscuit joiner; I've used one a handful of times and have always been impressed by the results.

Your clamp pattern is useful there, as is the idea of using scrap to form an 'edge' on the ends. I try to do something similar but it's more scattershot. I should probably just get more pipe clamps so I can get a better hold. I don't have a good reason not to; my new bench has a 4x6 work surface so I have plenty of room to operate, especially as my table saw has a nice extension table and my assembly table is my outfeed table so I can 'borrow' space from the cast-iron top on the saw or even the extension table as needed.

I have far more shop/tool than I have the skill for is the bottom line and all I can do to address that is keep failing forward. I was looking to make some mobile tool tables (want to build a new rolling table with folding sides for my slider, for instance) and my buddy just looks at me like I'm an idiot and says "guys with 800 sq foot workshops don't need mobile tools; design your space better".

Oh.
You can work on your bench? WTF? Mine is always cluttered with the stuff I am working with.

What is the advantage of a biscuit over a dowel? They seem to have a following. The dowel jig I bought was only about $20 and is complete with bits/collars/adaptors for 1/4-5/16 and 3/8 dowels. I have used a bunch of 3/8.
Posts: 33,337
HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.
    Reply With Quote
Old 02-02-2017, 01:00 PM   #113
DJ's left nut DJ's left nut is offline
Sauntering Vaguely Downwards
 
DJ's left nut's Avatar
 

Join Date: Sep 2005
Location: Columbia, Mo
Casino cash: $3289099
Quote:
Originally Posted by HemiEd View Post
You can work on your bench? WTF? Mine is always cluttered with the stuff I am working with.

What is the advantage of a biscuit over a dowel? They seem to have a following. The dowel jig I bought was only about $20 and is complete with bits/collars/adaptors for 1/4-5/16 and 3/8 dowels. I have used a bunch of 3/8.
My bench is in the center(ish) of the shop; pure assembly table. I have a conventional 3x14ish workbench run along the back wall where I have my cabinets, pegboards, etc.... That's what tends to turn into a cluster.

The assembly table stays fairly clean, especially with the drawers and cabinets I built into it; lots of storage space so I can just toss things in a drawer to keep them out of the way.

I don't know what the advantage would be but I suspect there's a little more give there; biscuits don't have to be razor precise to provide solid alignment; the taper and roundness allows for a little play there.

Probably just a margin for error thing. And a 'jig vs. joiner' thing; the joiners really are quick; line the tab in the center of the fence with your mark, push in once, move onto the next mark.

EDIT: Rockler's take on it -- http://www.rockler.com/how-to/doweli...iscuit-joints/
__________________
"If there's a god, he's laughing at us.....and our football team..."

"When you look at something through rose colored glasses, all the red flags just look like flags."
Posts: 59,679
DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.
    Reply With Quote
Old 02-02-2017, 01:20 PM   #114
HemiEd HemiEd is offline
The only constant is change
 
HemiEd's Avatar
 

Join Date: Dec 2004
Location: Ozarks
Casino cash: $3580564
That is an interesting article. I am mainly using the dowels for alignment and they seem to be pretty good at that. Like they said, the initial investment is less.

When gluing five boards up it can take a while! It is brutal on that white oak compared to the cedar.

Oh and I was just kidding on the bench thing, but it is a constant battle for sure. Sounds like you are set up well.
Posts: 33,337
HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.HemiEd is obviously part of the inner Circle.
    Reply With Quote
Old 02-02-2017, 01:34 PM   #115
DJ's left nut DJ's left nut is offline
Sauntering Vaguely Downwards
 
DJ's left nut's Avatar
 

Join Date: Sep 2005
Location: Columbia, Mo
Casino cash: $3289099
Quote:
Originally Posted by HemiEd View Post
That is an interesting article. I am mainly using the dowels for alignment and they seem to be pretty good at that. Like they said, the initial investment is less.

When gluing five boards up it can take a while! It is brutal on that white oak compared to the cedar.
I figure a $70 harbor freight special will do the job in the near term if I get a joiner. A solid jig is in the 20-30 range and the joiner is another power tool so that's always fun. For just a few bucks more, it seems like you'd make back some of the expense in raw efficiency.

I'm going to build a little kitchen helper for the 3 year old in the near future (yeah, right) and I'm going to use knock down joinery with dowels for added stability against twisting. Shouldn't be terribly complicated when all is said and done.
__________________
"If there's a god, he's laughing at us.....and our football team..."

"When you look at something through rose colored glasses, all the red flags just look like flags."
Posts: 59,679
DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.
    Reply With Quote
Old 02-02-2017, 04:56 PM   #116
notorious notorious is offline
Supporter
 
notorious's Avatar
 

Join Date: May 2005
Location: Who knows?
Casino cash: $3225884
Quote:
Originally Posted by HemiEd View Post
Do you have any pictures of the furniture you made? I will check out that site, thanks.

I am confused as to what you mean about water popping the wood? The quote you quoted of me I had already put the polyurethane on and had used the 400.600 then 1000 prior to buffing it out. Kind of like color sanding and buffing out the paint on a car.

The white oak I bought is hard as heck and very tight compared to the cedar. The last real woodwork I have done was over 50 years ago in school and it was all mahogany.

Thanks for your input.



You can work on your bench? WTF? Mine is always cluttered with the stuff I am working with.

What is the advantage of a biscuit over a dowel? They seem to have a following. The dowel jig I bought was only about $20 and is complete with bits/collars/adaptors for 1/4-5/16 and 3/8 dowels. I have used a bunch of 3/8.

Oh, the way I read it is that you were wetsanding the wood before stain, which wouldn't make any sense but I didn't want to be an asshole.
Posts: 83,074
notorious is obviously part of the inner Circle.notorious is obviously part of the inner Circle.notorious is obviously part of the inner Circle.notorious is obviously part of the inner Circle.notorious is obviously part of the inner Circle.notorious is obviously part of the inner Circle.notorious is obviously part of the inner Circle.notorious is obviously part of the inner Circle.notorious is obviously part of the inner Circle.notorious is obviously part of the inner Circle.notorious is obviously part of the inner Circle.
    Reply With Quote
Old 02-02-2017, 06:25 PM   #117
jspchief jspchief is offline
BAMF
 
jspchief's Avatar
 

Join Date: Apr 2004
Location: Your Face
Casino cash: $9998710
Quote:
Originally Posted by DJ's left nut View Post
I figure a $70 harbor freight special will do the job in the near term if I get a joiner. A solid jig is in the 20-30 range and the joiner is another power tool so that's always fun. For just a few bucks more, it seems like you'd make back some of the expense in raw efficiency.
When you say joiner are you talking biscuit joiner?

I have the Porter cable 557 and while it's very nice, I'm not sure it's the type of tool where spending more gets you more. If I had it to do over, I might go with the cheapest one (something I rarely do with tools).
__________________
Courage is not the absence of fear but rather the judgment that something is more important than fear.
The brave may not live forever but the cautious do not live at all.
Posts: 27,207
jspchief threw an interception on a screen pass.jspchief threw an interception on a screen pass.jspchief threw an interception on a screen pass.jspchief threw an interception on a screen pass.jspchief threw an interception on a screen pass.jspchief threw an interception on a screen pass.jspchief threw an interception on a screen pass.jspchief threw an interception on a screen pass.jspchief threw an interception on a screen pass.jspchief threw an interception on a screen pass.jspchief threw an interception on a screen pass.
    Reply With Quote
Old 02-02-2017, 07:12 PM   #118
DJ's left nut DJ's left nut is offline
Sauntering Vaguely Downwards
 
DJ's left nut's Avatar
 

Join Date: Sep 2005
Location: Columbia, Mo
Casino cash: $3289099
Quote:
Originally Posted by jspchief View Post
When you say joiner are you talking biscuit joiner?

I have the Porter cable 557 and while it's very nice, I'm not sure it's the type of tool where spending more gets you more. If I had it to do over, I might go with the cheapest one (something I rarely do with tools).
Yeah.

That's why I'd just get the cheap-o from Harbor Freight. My $30 angle grinder from there grinds as well as the nicer ones I've used. My drill press and my dust collector work great as well (though the dust collector has been disassembled and re-engineered).

For certain things, they do just fine and at 1/2 to 1/3 the price in many cases.
__________________
"If there's a god, he's laughing at us.....and our football team..."

"When you look at something through rose colored glasses, all the red flags just look like flags."
Posts: 59,679
DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.DJ's left nut is obviously part of the inner Circle.
    Reply With Quote
Old 02-02-2017, 07:15 PM   #119
jspchief jspchief is offline
BAMF
 
jspchief's Avatar
 

Join Date: Apr 2004
Location: Your Face
Casino cash: $9998710
Quote:
Originally Posted by DJ's left nut View Post
Yeah.

That's why I'd just get the cheap-o from Harbor Freight. My $30 angle grinder from there grinds as well as the nicer ones I've used. My drill press and my dust collector work great as well (though the dust collector has been disassembled and re-engineered).

For certain things, they do just fine and at 1/2 to 1/3 the price in many cases.
Just making sure you weren't considering the HF jointer.
__________________
Courage is not the absence of fear but rather the judgment that something is more important than fear.
The brave may not live forever but the cautious do not live at all.
Posts: 27,207
jspchief threw an interception on a screen pass.jspchief threw an interception on a screen pass.jspchief threw an interception on a screen pass.jspchief threw an interception on a screen pass.jspchief threw an interception on a screen pass.jspchief threw an interception on a screen pass.jspchief threw an interception on a screen pass.jspchief threw an interception on a screen pass.jspchief threw an interception on a screen pass.jspchief threw an interception on a screen pass.jspchief threw an interception on a screen pass.
    Reply With Quote
Old 02-02-2017, 07:21 PM   #120
Iowanian Iowanian is offline
Supporter
 
Iowanian's Avatar
 

Join Date: Aug 2000
Location: Utopia
Casino cash: $4928454
I like to build things out of wood, but I'm a shit finish carpenter. I've built some pine log beds with my brothers and build things out of old stuff more than the fine quality finished things I've seen from some of you over the years.

My power tools for woodwork are old and sad. I don't have half of what I need to do things the right way for finishing wood.

The coolest thing I've worked on was a project for a mentor...I helped him build a wooden canoe made of 1" strips of wood.

My next two planned projects are barn wood related. I plan to build a chandelier for our table and I'm debating between a design using old barn wood, making a shadow box with a flat, rough piece with wires hanging old jars over LED lights or one made with barn trolleys and a couple of old lanterns. Wiring them right is my biggest concern because I'm worse with electricity than fine cut corners.

I also am planning a "railroad cart" style table. I cut some large cat iron wheels off an old safe and want to built a barn wood coffee table out of that.

Additional projects I'd like to do include a free hanging mantle for a large bland wall made out of rough cut beams or old barn beams. I'm also planning to fire up the welder and do some shitty welding to make some 2-3' dinosaurs out of a big pile of old rust wrenches I've picked up along the way.


Maybe I'm just better at these projects because they're supposed to look like hell on the corners.
Posts: 61,489
Iowanian is obviously part of the inner Circle.Iowanian is obviously part of the inner Circle.Iowanian is obviously part of the inner Circle.Iowanian is obviously part of the inner Circle.Iowanian is obviously part of the inner Circle.Iowanian is obviously part of the inner Circle.Iowanian is obviously part of the inner Circle.Iowanian is obviously part of the inner Circle.Iowanian is obviously part of the inner Circle.Iowanian is obviously part of the inner Circle.Iowanian is obviously part of the inner Circle.
    Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump




All times are GMT -6. The time now is 08:29 PM.


This is a test for a client's site.
Fort Worth Texas Process Servers
Covering Arlington, Fort Worth, Grand Prairie and surrounding communities.
Tarrant County, Texas and Johnson County, Texas.
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2024, vBulletin Solutions, Inc.