Software to edit out static from digital audio recording?

**jAZ** · 03-22-2006, 05:41 PM

So I recorded my appearance on a local AM talk radio show today. The radio that I used to record the show didn't get a really strong signal, so there was a good amount of static in the recording.

I'm wondering if there is any editing software out there (opensource, free or free trial) that can be used to tone down or edit out the higher pitched static and leave the voice conversation.

Thanks!

Simplex3 · 03-22-2006, 11:00 PM

I'd probably try to work the other way, but whatever floats your boat.

You won't have good luck removing the static unless it's pretty consistent through the whole thing. You'd probably have much better luck just asking the station for a dupe.

'Hamas' Jenkins · 03-22-2006, 11:07 PM

It's just a thought, but if the static is on the high end of the spectrum, have you thought about taking any sound program with an eq and eliminating anything above say 4khz?

**Bob Dole** · 03-23-2006, 07:20 AM

Try Audacity.

**jAZ** · 03-24-2006, 02:54 PM

Quote:

Originally Posted by Bob Dole

Try Audacity.

I acutally used Audacity to record the broadcast, but didn't see any filters or anything in there. Have you used it before and if so, did I miss a useful function. Honestly, I know nothing about this stuff, so I'm kind of a hand-holder in this respect.

**Bob Dole** · 03-24-2006, 05:11 PM

Quote:

Originally Posted by jAZ

I acutally used Audacity to record the broadcast, but didn't see any filters or anything in there. Have you used it before and if so, did I miss a useful function. Honestly, I know nothing about this stuff, so I'm kind of a hand-holder in this respect.

Look under the "Effect" menu.

03-22-2006, 05:41 PM
jAZ Supporter Join Date: Apr 2001 Location: Tucson, AZ Casino cash: $7593	Software to edit out static from digital audio recording? So I recorded my appearance on a local AM talk radio show today. The radio that I used to record the show didn't get a really strong signal, so there was a good amount of static in the recording. I'm wondering if there is any editing software out there (opensource, free or free trial) that can be used to tone down or edit out the higher pitched static and leave the voice conversation. Thanks!
Posts: 24,787

03-22-2006, 11:00 PM	#2
Simplex3 MVP Join Date: Sep 2003 Casino cash: $5000	I'd probably try to work the other way, but whatever floats your boat. You won't have good luck removing the static unless it's pretty consistent through the whole thing. You'd probably have much better luck just asking the station for a dupe.
Posts: 28,527

03-22-2006, 11:07 PM	#3
'Hamas' Jenkins Only rapes to save Join Date: Jan 2006 Casino cash: $39672	It's just a thought, but if the static is on the high end of the spectrum, have you thought about taking any sound program with an eq and eliminating anything above say 4khz? __________________ "When the Know-Nothings get control, it will read 'all men are created equal, except negroes, and foreigners, and Catholics.' When it comes to this I should prefer emigrating to some country where they make no pretense of loving liberty – to Russia, for instance, where despotism can be taken pure, and without the base alloy of hypocrisy.”--Abraham Lincoln
Posts: 68,202

03-23-2006, 07:20 AM	#4
Bob Dole King Shit of **** Mountain Join Date: Aug 2000 Location: Texarkana, Texas Casino cash: $34597	Try Audacity. __________________ Help support Bob Dole's drinking habit by purchasing this song.
Posts: 39,490

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode