ChiefsPlanet

ChiefsPlanet (https://chiefsplanet.com/BB/index.php)
-   Nzoner's Game Room (https://chiefsplanet.com/BB/forumdisplay.php?f=1)
-   -   What to wear to Interview? (https://chiefsplanet.com/BB/showthread.php?t=171295)

ILikeBigTiddys 10-01-2007 10:39 AM

What to wear to Interview?
 
I know everyone wants to talk about the big win but could you guys offer a little help my way. I have a interview along with some written tests tomorrow with the Union Pacific for a job that includes welding and repairing. What would you guys wear to this? Khakis or jeans? Polo or a button up?

seclark 10-01-2007 10:40 AM

show some cleavage.
sec

mikeyis4dcats. 10-01-2007 10:40 AM

Khakis, polo shirt

a good tip is to dress one level above your expected job. I assume you will wear jeans and a denim shirt/tee shirt in the rail shop.

DMAC 10-01-2007 10:41 AM

Your Chiefs jersey.

DaFace 10-01-2007 10:43 AM

Quote:

Originally Posted by mikeyis4dcats.
Khakis, polo shirt

a good tip is to dress one level above your expected job. I assume you will wear jeans and a denim shirt/tee shirt in the rail shop.

Yep.

cmh6476 10-01-2007 10:45 AM

business

morphius 10-01-2007 10:46 AM

Be sure to wear something you would feel comfortable doing the job in as well, I have heard some people not get jobs similar to this one because they were overdressed, as confusing as that is.

StcChief 10-01-2007 10:51 AM

Just remember...

You don't get a 2nd chance to make a first impression.

Morphius advise sounds reasonable....

chief52 10-01-2007 10:54 AM

Quote:

Originally Posted by morphius
Be sure to wear something you would feel comfortable doing the job in as well, I have heard some people not get jobs similar to this one because they were overdressed, as confusing as that is.


I have always heard you should wear what you would to do the job. In this case, nice work shirt and levis with work boots would seem to be the attire to me. What if they want you to do some welding to show what you can do? Got to be ready to go to work IMO.

morphius 10-01-2007 10:54 AM

Quote:

Originally Posted by StcChief
Just remember...

You don't get a 2nd chance to make a first impression.

Morphius advise sounds reasonable....

I have heard it from a couple repair techs where they brought them in and actually had them mess around in stuff, which you can't do if you are too dressed up.

StcChief 10-01-2007 10:59 AM

Quote:

Originally Posted by morphius
I have heard it from a couple repair techs where they brought them in and actually had them mess around in stuff, which you can't do if you are too dressed up.

I'm not familiar with that type of work. but have been quized/grilled etc in an interview. Asked to do white board work....

If you don't have a a cert or something they may want you to do something on site.

Either way once you pass you'll likely be on probation for a while, which varies from job to job.


I would think communication and fit are the starting point

Iowanian 10-01-2007 11:24 AM

I'm completely on board with dressing 1 level above what you would at work. If its a khaki and Polo job...at least wear a tie.

if you're taking a welding test....it doesn't make much sense to me to wear a tie for that.

Its a good rule of thumb in business too....dress 1 level above your client-audience.

ILikeBigTiddys 10-01-2007 11:39 AM

Well it is for an Apprentice Freight Car Repairer. From what they have said it will be about 4 hours of their Skilled Craft Battery Test and if I pass I get an interview and be prepared to spend majority of your day there. I hope I dont get the shits.

seclark 10-01-2007 11:41 AM

Quote:

Originally Posted by ILikeBigTiddys
I hope I dont get the shits.

in that case, wear depends.
sec

teedubya 10-01-2007 11:44 AM

http://www.tuxedotshirts.com/tuxedoclassic1.jpg

I always wear this.


All times are GMT -6. The time now is 08:04 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2025, vBulletin Solutions, Inc.