Quote:
Originally Posted by loochy
I'm having a hell office a time getting little stuff to stay stuck to the plate. It always pops off and then everything fouls and ruins the print
|
Before you print, clean your plate vigorously with isopropyl alcohol. Every time.
Be sure to use Brim. And increase the temp of your plate by 2-3 degrees for the first layer. Both will really help that first layer to stick.
If you model is top heavy in any way, you must use supports. Many models require them for a successful print. Sometimes it's a pain, as you'll use more filament for the supports than you do for the actual model.
If you have a particular model that's giving you trouble, link the model here.