Home and Auto ***Official Car and Gearhead Thread*** - Page 184

**BigRedChief** · 03-17-2015, 12:29 PM

Seems like we need one on here to talk cars, mods and the coolness of your or their car.

Interested? Chime in

ModSocks · 12-23-2016, 02:59 PM

Quote:

Originally Posted by Dinny Bossa Nova

BL has had these meltdowns before. He'll be fine. It just happened to be SAUTO's turn.

Dinny

This.

ping2000 · 12-23-2016, 03:04 PM

Tombstone RJ · 12-23-2016, 07:32 PM

Quote:

Originally Posted by Baby Lee

Eat my entire asshole with strawberry jam.

How's that for specific?

lulzzz I think this is the post that really got the ball rolling in this awesome exchange that's eaten up, what, 5-6 pages?

**hometeam** · 12-24-2016, 12:51 AM

Put in a ton of work tonight;

Got transmission fully seated
starter mounted
trans cooler mounted and ran
safety switch wired
shimmed the trans mount for driveshaft loop clearance
put u joint in and mounted driveshaft
adjusted rear end
re-pinned the ECU to accept the new speed sensor so the 4l80e works
wired the entire car front to back
mounted the intake and fuel rails
mounted and ran the tubing for the catch can
primed the motor
filled the trans and radiator

and this

Car moves under its own power, first and reverse. Car is running open headers right here, and was way louder in person than the video. My girlfriend was actually jaw dropped and scared by it, as she was standing right behind the car~ Still need to open up the segment for the automatic transmission in the ECU, start tuning etc. Very little left to do in the car before its ready to rip.

I have done a ton of this work myself, including assembling the motor, helping to mount every single thing, pinning the ecu and more

Tombstone RJ · 12-24-2016, 02:58 PM

Sounds good. Did you drop an LS3 in that bad boy?

**hometeam** · 12-24-2016, 05:03 PM

Quote:

Originally Posted by Tombstone RJ

Sounds good. Did you drop an LS3 in that bad boy?

ls3 is a 6.2 liter block and gen 4 pistons and rods, with rectangle port heads.

This motor is a 6.0 with gen 4 pistons and rods, and cnc ported cathedral port heads.

Tombstone RJ · 12-24-2016, 05:18 PM

Quote:

Originally Posted by hometeam

ls3 is a 6.2 liter block and gen 4 pistons and rods, with rectangle port heads.

This motor is a 6.0 with gen 4 pistons and rods, and cnc ported cathedral port heads.

Very nice...

Marcellus · 12-24-2016, 05:21 PM

Quote:

Originally Posted by Tombstone RJ

Very nice...

Like you have a clue.

Tombstone RJ · 12-24-2016, 05:25 PM

Quote:

Originally Posted by Marcellus

Like you have a clue.

I know you're an idiot, so I got that going for me...

**BigRedChief** · 12-24-2016, 05:48 PM

Quote:

Originally Posted by Tombstone RJ

Very nice...

Quote:

Originally Posted by Marcellus

Like you have a clue.

Quote:

Originally Posted by Tombstone RJ

I know you're an idiot, so I got that going for me...

Wtf? You guys trying to pick up where BL and Sauto left off?

**SAUTO** · 12-24-2016, 05:50 PM

Quote:

Originally Posted by BigRedChief

Wtf? You guys trying to pick up where BL and Sauto left off?

Shut the **** up.

**hometeam** · 12-26-2016, 11:49 PM

Finished up everything tonight but the tune, wired and ran the wideband and the trans temp gauge, my friend made some perfect aluminum mounts which we used to mount the guages in the vents in the dash. Finished up some very minor other odds and ends.

Tomorrow night the car is going to drive. Basically just going to do the segment swap (change ECU to be able to control the 4l80) tune on it a little and let it rip.

Exhaust shop Wednesday with more tuning and car should be ready to break the ten bolt real quick~

**BigRedChief** · 12-28-2016, 10:28 PM

Put my 2nd full set of tires on the car and the 3rd set of back tires. 15K miles. I know it's my fault for the 3rd set on the back. But anyone in here know why the set on the front would go bad at 15K. Dealer is telling me these high performance car and tires are just like that. Bs? Or true?

**SAUTO** · 12-28-2016, 11:03 PM

Quote:

Originally Posted by BigRedChief

Put my 2nd full set of tires on the car and the 3rd set of back tires. 15K miles. I know it's my fault for the 3rd set on the back. But anyone in here know why the set on the front would go bad at 15K. Dealer is telling me these high performance car and tires are just like that. Bs? Or true?

They are really soft.

You're gonna go through them

**Indian Chief** · 12-28-2016, 11:56 PM

Quote:

Originally Posted by BigRedChief

Put my 2nd full set of tires on the car and the 3rd set of back tires. 15K miles. I know it's my fault for the 3rd set on the back. But anyone in here know why the set on the front would go bad at 15K. Dealer is telling me these high performance car and tires are just like that. Bs? Or true?

What are you running, as in which tires? And are you going staggered so no rotations?

03-17-2015, 12:29 PM
BigRedChief Has a particular set of skills Join Date: Dec 2003 Location: On the water Casino cash: $3189627 VARSITY	*Official Car and Gearhead Thread* Seems like we need one on here to talk cars, mods and the coolness of your or their car. Interested? Chime in
Posts: 78,957

12-23-2016, 03:04 PM	#2747
ping2000 Changes pants while driving Join Date: Nov 2001 Location: Washington D.C. Casino cash: $5950495
Posts: 15,764

12-24-2016, 12:51 AM	#2749
hometeam Supporter Join Date: Jul 2011 Casino cash: $4151956	Put in a ton of work tonight; Got transmission fully seated starter mounted trans cooler mounted and ran safety switch wired shimmed the trans mount for driveshaft loop clearance put u joint in and mounted driveshaft adjusted rear end re-pinned the ECU to accept the new speed sensor so the 4l80e works wired the entire car front to back mounted the intake and fuel rails mounted and ran the tubing for the catch can primed the motor filled the trans and radiator and this Car moves under its own power, first and reverse. Car is running open headers right here, and was way louder in person than the video. My girlfriend was actually jaw dropped and scared by it, as she was standing right behind the car~ Still need to open up the segment for the automatic transmission in the ECU, start tuning etc. Very little left to do in the car before its ready to rip. I have done a ton of this work myself, including assembling the motor, helping to mount every single thing, pinning the ecu and more Last edited by hometeam; 12-24-2016 at 01:45 AM..
Posts: 10,636

12-24-2016, 02:58 PM	#2750
Tombstone RJ Broncos' Fan Extraordinaire! Join Date: Sep 2003 Location: Denver Casino cash: $10012184	Sounds good. Did you drop an LS3 in that bad boy? __________________ ORANGE COLORED GLASSES ARE ALWAYS ON!
Posts: 6,151

12-26-2016, 11:49 PM	#2757
hometeam Supporter Join Date: Jul 2011 Casino cash: $4151956	Finished up everything tonight but the tune, wired and ran the wideband and the trans temp gauge, my friend made some perfect aluminum mounts which we used to mount the guages in the vents in the dash. Finished up some very minor other odds and ends. Tomorrow night the car is going to drive. Basically just going to do the segment swap (change ECU to be able to control the 4l80) tune on it a little and let it rip. Exhaust shop Wednesday with more tuning and car should be ready to break the ten bolt real quick~
Posts: 10,636

12-28-2016, 10:28 PM	#2758
BigRedChief Has a particular set of skills Join Date: Dec 2003 Location: On the water Casino cash: $3189627 VARSITY	Put my 2nd full set of tires on the car and the 3rd set of back tires. 15K miles. I know it's my fault for the 3rd set on the back. But anyone in here know why the set on the front would go bad at 15K. Dealer is telling me these high performance car and tires are just like that. Bs? Or true? __________________ Fear leads to anger, anger leads to hate, hate leads to suffering. -YODA
Posts: 78,957