Not sure what the

jollymon · 04-11-2005, 07:48 PM

problem is. Ok I logged onto Newegg last week and bought a new Mobo, DDR Ram, and a PSU. I was going to throw my HD and other parts into this new monster and use an old Dell Tower. After rigging the On Button to work with this new Motherboard (ASUS P4S800 MX) and installing an old P4 (2.4 512kb 400fsb) the damn thing will not recognize my monitor. The monitor acts like it is just turned off, it just blinks orange like the monitor is on but the PC is turned off.

I wanted to know if this is more than likely the CPU or could it be the new motherboard, PSU, or somethign else? Note I did not install my RAM or anything so it is not loose cards or anything like that. I did however try it with ram and stuff and got the same reaction from it.

I am going to go to bed and hopefully some tech gurus will figure it all out. Also I may be wiulling to buy a working P4 processor that is used and fairly priced, because I don't want to put much more out. Also could it possibly be a haunted case? Doooo Doooo Dooooooo....

**penguinz** · 04-11-2005, 08:40 PM

Do you get any post beeps?

"Bob" Dobbs · 04-11-2005, 10:14 PM

also, onboard video or using a video card? if you have BOTH, is the monitor plugged into the right one?

"Bob" Dobbs · 04-11-2005, 10:16 PM

my other immediate thought is bad power supply

jollymon · 04-12-2005, 03:10 AM

no post beeps t all.

and I have another vudeo card but am just using the onboard for hookup

"Bob" Dobbs · 04-12-2005, 03:34 AM

is the other video card currently installed in the machine? In some cases, the BIOS disables onboard video automatically when theres a card in the AGP slot.

"Bob" Dobbs · 04-12-2005, 03:35 AM

...and i would think you should hear ONE post beep, anyway. zero sounds like a bad sign.

**penguinz** · 04-12-2005, 07:33 AM

Remove the RAM and try to boot it. If you do not get any error tones then it is either the CPU or the MB.

jollymon · 04-13-2005, 03:10 AM

It was the processor. I have a Celeron 2.4 in there now that a friend let me have. Now I am just saving up for the Pentium.

04-11-2005, 07:48 PM
jollymon Green Lantern Join Date: Sep 2002 Location: Harlan, Ky. Casino cash: $10004900	Not sure what the problem is. Ok I logged onto Newegg last week and bought a new Mobo, DDR Ram, and a PSU. I was going to throw my HD and other parts into this new monster and use an old Dell Tower. After rigging the On Button to work with this new Motherboard (ASUS P4S800 MX) and installing an old P4 (2.4 512kb 400fsb) the damn thing will not recognize my monitor. The monitor acts like it is just turned off, it just blinks orange like the monitor is on but the PC is turned off. I wanted to know if this is more than likely the CPU or could it be the new motherboard, PSU, or somethign else? Note I did not install my RAM or anything so it is not loose cards or anything like that. I did however try it with ram and stuff and got the same reaction from it. I am going to go to bed and hopefully some tech gurus will figure it all out. Also I may be wiulling to buy a working P4 processor that is used and fairly priced, because I don't want to put much more out. Also could it possibly be a haunted case? Doooo Doooo Dooooooo....
Posts: 1,121

04-11-2005, 08:40 PM	#2
penguinz Supporter Join Date: Mar 2003 Casino cash: $3067626	Do you get any post beeps? __________________
Posts: 16,315

04-11-2005, 10:14 PM	#3
"Bob" Dobbs Kickin' it in Dobbstown. Join Date: Nov 2003 Location: Southeast Kansas Casino cash: $9824317	also, onboard video or using a video card? if you have BOTH, is the monitor plugged into the right one? __________________ Eternal Salvation -- Or TRIPLE your money back! http://subgenius.com
Posts: 3,315

04-11-2005, 10:16 PM	#4
"Bob" Dobbs Kickin' it in Dobbstown. Join Date: Nov 2003 Location: Southeast Kansas Casino cash: $9824317	my other immediate thought is bad power supply __________________ Eternal Salvation -- Or TRIPLE your money back! http://subgenius.com
Posts: 3,315

04-12-2005, 03:10 AM	#5
jollymon Green Lantern Join Date: Sep 2002 Location: Harlan, Ky. Casino cash: $10004900	no post beeps t all. and I have another vudeo card but am just using the onboard for hookup __________________ Proud sponsor of Gunther Cunningham. Now I need a good Gunther pic....
Posts: 1,121

04-12-2005, 03:34 AM	#6
"Bob" Dobbs Kickin' it in Dobbstown. Join Date: Nov 2003 Location: Southeast Kansas Casino cash: $9824317	is the other video card currently installed in the machine? In some cases, the BIOS disables onboard video automatically when theres a card in the AGP slot. __________________ Eternal Salvation -- Or TRIPLE your money back! http://subgenius.com
Posts: 3,315

04-12-2005, 03:35 AM	#7
"Bob" Dobbs Kickin' it in Dobbstown. Join Date: Nov 2003 Location: Southeast Kansas Casino cash: $9824317	...and i would think you should hear ONE post beep, anyway. zero sounds like a bad sign. __________________ Eternal Salvation -- Or TRIPLE your money back! http://subgenius.com
Posts: 3,315

04-12-2005, 07:33 AM	#8
penguinz Supporter Join Date: Mar 2003 Casino cash: $3067626	Remove the RAM and try to boot it. If you do not get any error tones then it is either the CPU or the MB. __________________
Posts: 16,315

04-13-2005, 03:10 AM	#9
jollymon Green Lantern Join Date: Sep 2002 Location: Harlan, Ky. Casino cash: $10004900	It was the processor. I have a Celeron 2.4 in there now that a friend let me have. Now I am just saving up for the Pentium. __________________ Proud sponsor of Gunther Cunningham. Now I need a good Gunther pic....
Posts: 1,121