Reverse polarity protection design to protect from improper battery installation.
Aircraft-grade aluminum body.
Premium Type III hard-anodized anti-abrasive finish.
Toughened ultra-clear glass lens with anti-reflective coating.
Smooth reflector gives perfect beam and throw.
Dimension: 143mm (Length)*25.4mm (Diameter).
Weight: only 86g (without batteries)
Accessories: Holster x 1, Spare O-rings x 2, Lanyard x 1, Tail Cap x 1, Pocket Clip x 1.
Operation
Turn ON/OFF Press the tail switch gently for momentary on or until it clicks to turn on the light. Press again to turn the light off.
Change Modes With the light turns on, press the side switch to circle through five different mode outputs from Firefly, Low, Medium, High and Turbo.
One Key to Strobe With the light on, press and hold the side switch for about 1 second to enter into Strobe mode (13Hz), and a single press the side switch
will return to the last mode before Strobe.
Unique Firefly Mode
What’s the use of this 0.4 lumen setting, which is similar to moonlight?
Reading a map while surviving, guiding the way without blinding yourself while awake from sleep,
or just reading in its natural beam to protect the eyes at night.
Firefly mode is what ThruNite keeps doing to be considerate for every user, tactical or normal.
Cautions
Use Of Battery Battery: Uses 1*18650 /2*CR123 batteries.
Battery Replacement: To ensure performance of the flashlight and for your own safety, please use good quality with an integrated protected circuit
and make sure to insert the battery correctly with the positive(+) polarity pointing to the light head.
Please take out battery if you will not use your light for an extended period of time to avoid battery leakage,which may damage the flashlight components and parts.
Use of O-rings (if available) The right amount of lubricant will be used on the O-rings before shipping to ensure the light can be assembled smoothly and protect from oxidizing the O-rings.
If necessary, please replace the spare O-rings attached in the package.
Max Output Please mind the heat. When the light runs a long time, there is heat coming from battery discharge, drive circuit and LED, the flashlight head will be very hot.
DO NOT run the light at max mode for a long time. To protect the battery, driver circuit and LED,
we do not recommend you run the light at max mode more than ten minutes.
I will look it up - do you have the quick price estimate.