Home and Auto Handy-Man Corner - Page 77

**Iowanian** · 09-24-2004, 08:25 AM

I'm tired of bad Chiefs news.....

I thought it would be a good idea for a thread on the Handy-Man.

Do you have any Home remedies, gadgets you've made, advice on car repair, home maint, sollutions to kill weeds in your yard, bugs in your garden?

Use Coke to clean your batteries? That type of stuff.
Home made floor dry?

**srvy** · 05-21-2019, 05:21 PM

I wonder who insurance companies recommend when a dead body is found in a car after a few weeks. The guy that got the job of cleaning and deodorizing the KCI suicide in parking lot that wasn't discovered for nearly a year. Id seek that guys advice.

**SAUTO** · 05-21-2019, 08:24 PM

Nasty nasty job

**SAUTO** · 05-21-2019, 08:29 PM

Did who ever pulled the fan make sure there there wasn't more nest above it?

cooper barrett · 05-26-2019, 05:29 PM

Try soaking rags in Oderban, and stuffing them under seats, in dash vents and even to wash surfaces with. Sams Walmart Amazon

Quote:

Originally Posted by Iowanian

I have an issue I'm hoping someone has a known-proven solution to resolve.

I have a work vehicle that was left in a shop-garage all winter. Mice got into it and wreaked havoc. I've dealt with the obvious grossness of turds in cup holders and cleaned out the other messes previously. The new issue arose when turning on the AC...stinks to hades.

I had the cabin filter changed and a dead mouse was removed from the fan area inside the dash. It still stinks like hell.

I've heard rumors of some ozone treatment or something, but I was hoping someone here knows the right answer about what to do.

**Iowanian** · 05-26-2019, 09:04 PM

I'm not sure why I do so many things the hard way.

This weekend I bought a scoop for my tractor. It's an old one, and I had figured out the source and what the guy had paid for a tractor that had this scoop. I ball park surmised it a similar size to my tractor and I put on a buyers clinic that would make you all proud. I offered half price and we tussled and sparred and lobbed arguments as to why each were right. I pull the pin and raise my final offer $100. He's going to have to take a beating. He wants another 50....I say I respect that he has to draw a line and so do I and I walk to my truck. The gentlemen comes out before I leave and agrees essentially to my terms. I was pretty proud of myself on the rife ho,e.

I get it home....and the front brackets are 2" too narrow....and the brackets that attach to the axels are 8-10" too long. To use this, it's going to require fire axe and welding skills beyond my known ability.

Not sure why I insist on doing so many things the hard way. I do it to save money, but now I have an old loader, that doesn't fit....my old tractor that runs, sometimes.

**Buehler445** · 05-27-2019, 07:40 AM

Quote:

Originally Posted by Iowanian

I'm not sure why I do so many things the hard way.

This weekend I bought a scoop for my tractor. It's an old one, and I had figured out the source and what the guy had paid for a tractor that had this scoop. I ball park surmised it a similar size to my tractor and I put on a buyers clinic that would make you all proud. I offered half price and we tussled and sparred and lobbed arguments as to why each were right. I pull the pin and raise my final offer $100. He's going to have to take a beating. He wants another 50....I say I respect that he has to draw a line and so do I and I walk to my truck. The gentlemen comes out before I leave and agrees essentially to my terms. I was pretty proud of myself on the rife ho,e.

I get it home....and the front brackets are 2" too narrow....and the brackets that attach to the axels are 8-10" too long. To use this, it's going to require fire axe and welding skills beyond my known ability.

Not sure why I insist on doing so many things the hard way. I do it to save money, but now I have an old loader, that doesn't fit....my old tractor that runs, sometimes.

I know nothing about what’s available for the models you have but SOMETIMES there are adapter kits for loaders for common tractors.

If it’s just a bracket that needs work, most welding shops can do that in no time. You won’t like the money, but I’d do it. Having a scoop really increases the value of the old tractors. You’d probably get your money back out of having a welder do it.

threebag · 05-27-2019, 07:58 AM

Work out a trade for honey

HonestChieffan · 05-27-2019, 01:20 PM

Quote:

Originally Posted by Iowanian

I have an issue I'm hoping someone has a known-proven solution to resolve.

I have a work vehicle that was left in a shop-garage all winter. Mice got into it and wreaked havoc. I've dealt with the obvious grossness of turds in cup holders and cleaned out the other messes previously. The new issue arose when turning on the AC...stinks to hades.

I had the cabin filter changed and a dead mouse was removed from the fan area inside the dash. It still stinks like hell.

I've heard rumors of some ozone treatment or something, but I was hoping someone here knows the right answer about what to do.

Had one in my truck 2 years ago in heater. Called dealer in Clinton MO where I bought it and they said no problem we have the stuff that will kill the smell...they dug out the nest, did magic with some stuff and it never smelled again...They used a BG product for odor control

**lewdog** · 03-21-2020, 08:29 PM

Recently had someone recommend Water Heater maintenance.

Cut off water supply to tank.
Drain completely.
Turn water supply back on.

Is this recommended every year?

**srvy** · 03-21-2020, 09:06 PM

Actually turn off the pilot hook garden hose to the spigot at bottom tank run hose outside or to a floor drain. Close the water supply to tank open hose spigot drain the hot water off. Then turn the water supply to the tank on let run 1/2 to an hour to flush the crud that builds up in the tank. This they recommend at least once a year to get the longest life expectancy of the tank.

FlaChief58 · 03-21-2020, 09:12 PM

Quote:

Originally Posted by lewdog

Recently had someone recommend Water Heater maintenance.

Cut off water supply to tank.
Drain completely.
Turn water supply back on.

Is this recommended every year?

Yes, especially if you have hard water. Also, it's very important to cycle your temperature & pressure relief valve to make sure it's working properly. It's the only thing standing between you and a blown tank if the heater fails and overheats the water inside

HonestChieffan · 03-21-2020, 10:34 PM

Quote:

Originally Posted by lewdog

Recently had someone recommend Water Heater maintenance.

Cut off water supply to tank.
Drain completely.
Turn water supply back on.

Is this recommended every year?

I do mine at least every 2 months gobs of mineral grit every time

Make sure you cut power off to it when u drain it

**Bugeater** · 03-21-2020, 10:37 PM

Quote:

Originally Posted by FlaChief58

Yes, especially if you have hard water. Also, it's very important to cycle your temperature & pressure relief valve to make sure it's working properly. It's the only thing standing between you and a blown tank if the heater fails and overheats the water inside

Wait...so having a water softener will make my water heater last longer?

HonestChieffan · 03-21-2020, 10:41 PM

Quote:

Originally Posted by Bugeater

Wait...so having a water softener will make my water heater last longer?

yes and operate more efficiently

**Bugeater** · 03-21-2020, 11:14 PM

Well that's a bonus. I sort of scoffed at the fact our new place had one at first, but after seeing the difference it makes as far as all the fixtures and shower doors, etc staying cleaner I can't believe I ever lived without one.

09-24-2004, 08:25 AM
Iowanian Supporter Join Date: Aug 2000 Location: Utopia Casino cash: $1788454	Handy-Man Corner I'm tired of bad Chiefs news..... I thought it would be a good idea for a thread on the Handy-Man. Do you have any Home remedies, gadgets you've made, advice on car repair, home maint, sollutions to kill weeds in your yard, bugs in your garden? Use Coke to clean your batteries? That type of stuff. Home made floor dry?
Posts: 62,934

05-21-2019, 05:21 PM	#1141
srvy Fight, build, win! Join Date: Sep 2004 Location: KC Casino cash: $-2048750	I wonder who insurance companies recommend when a dead body is found in a car after a few weeks. The guy that got the job of cleaning and deodorizing the KCI suicide in parking lot that wasn't discovered for nearly a year. Id seek that guys advice. __________________ "The victim stance is a powerful one. The victim is always morally right, neither responsible nor accountable, and forever entitled to sympathy."
Posts: 25,747

05-21-2019, 08:24 PM	#1142
SAUTO Shit Join Date: Jun 2008 Casino cash: $10039067	Nasty nasty job
Posts: 55,715

05-21-2019, 08:29 PM	#1143
SAUTO Shit Join Date: Jun 2008 Casino cash: $10039067	Did who ever pulled the fan make sure there there wasn't more nest above it?
Posts: 55,715	1 0

05-26-2019, 09:04 PM	#1145
Iowanian Supporter Join Date: Aug 2000 Location: Utopia Casino cash: $1788454	I'm not sure why I do so many things the hard way. This weekend I bought a scoop for my tractor. It's an old one, and I had figured out the source and what the guy had paid for a tractor that had this scoop. I ball park surmised it a similar size to my tractor and I put on a buyers clinic that would make you all proud. I offered half price and we tussled and sparred and lobbed arguments as to why each were right. I pull the pin and raise my final offer $100. He's going to have to take a beating. He wants another 50....I say I respect that he has to draw a line and so do I and I walk to my truck. The gentlemen comes out before I leave and agrees essentially to my terms. I was pretty proud of myself on the rife ho,e. I get it home....and the front brackets are 2" too narrow....and the brackets that attach to the axels are 8-10" too long. To use this, it's going to require fire axe and welding skills beyond my known ability. Not sure why I insist on doing so many things the hard way. I do it to save money, but now I have an old loader, that doesn't fit....my old tractor that runs, sometimes.
Posts: 62,934

05-27-2019, 07:58 AM	#1147
threebag Snacks Are Under My Apron Join Date: Jan 2006 Location: The Edge Casino cash: $-922380	Work out a trade for honey __________________ Smells like Up Dog in here. RIP HayWire Greatest Almost Mod Ever
Posts: 26,175	1 0

03-21-2020, 08:29 PM	#1149
lewdog Mod Team Join Date: Sep 2011 Location: Valley of the hot as **** Casino cash: $-1398100	Recently had someone recommend Water Heater maintenance. Cut off water supply to tank. Drain completely. Turn water supply back on. Is this recommended every year?
Posts: 46,313

03-21-2020, 09:06 PM	#1150
srvy Fight, build, win! Join Date: Sep 2004 Location: KC Casino cash: $-2048750	Actually turn off the pilot hook garden hose to the spigot at bottom tank run hose outside or to a floor drain. Close the water supply to tank open hose spigot drain the hot water off. Then turn the water supply to the tank on let run 1/2 to an hour to flush the crud that builds up in the tank. This they recommend at least once a year to get the longest life expectancy of the tank. __________________ "The victim stance is a powerful one. The victim is always morally right, neither responsible nor accountable, and forever entitled to sympathy."
Posts: 25,747	1 0

03-21-2020, 11:14 PM	#1155
Bugeater The Maintenance Guy Join Date: Sep 2005 Location: Renovated Bugeater Estate Casino cash: $3992680	Well that's a bonus. I sort of scoffed at the fact our new place had one at first, but after seeing the difference it makes as far as all the fixtures and shower doors, etc staying cleaner I can't believe I ever lived without one.
Posts: 70,546	1 0