Home and Auto Load Bearing Wall - Page 2

**BigRichard** · 01-02-2023, 10:48 AM

Happy New Years everyone. A couple of quick questions for the construction guys. I am working on remodeling some stuff in my house. I want to take down a small piece of a wall and I am trying to decide if it is load bearing or not. The wall does run perpendicular to the trusses/floor boards so it is a possiblity but I am pretty certain it isn't. The things that lead me to believe this are a few different things... This wall is only 5 feet from the outside wall and there is another wall running for most of the length of the house down the middle(wall behind the shower in the picture). I believe that wall would be the load bearing one in this case. The other thing is there was a door frame in this section of the wall and from my picture you can see the frame isn't even sitting down on the wood for support. For it to be load bearing you shouldn't see that gap like you can in the picture I would think. I also thought door frames on load bearing walls would have two 2x4s supporting the two 2x4's across the top and not just one like there is. The previous owner said he couldn't find the original prints for it but he said something about using trusses so he didn't think it was load bearing... Not sure if trusses have any relevance to that wall being load bearing or not but maybe someone can answer that as well.

FlaChief58 · 01-02-2023, 11:49 AM

Quote:

Originally Posted by notorious

Normally, in proper construction.

I've seen shit that'll turn you white.

True, handymen will do some crazy shit. I was assuming that the wall is original to the house in which case it would have never passed framing inspection

**TribalElder** · 01-02-2023, 11:49 AM

looking for a skank with a load bearing face

ChiefsFan63 · 01-02-2023, 12:01 PM

If your house is built using roof trusses it would be easy to look in the attic and see what direction they are running. Or just look a the ridge of your roof. A bearing wall will run perpendicular to the roof and floor joists of trusses. I agree with an earlier post that I doubt it is a bearing wall. That is definitely non-bearing construction. But yeah, some people do some shady stuff in construction.

kccrow · 01-02-2023, 01:09 PM

Quote:

Originally Posted by FlaChief58

It's not load bearing. If it were, there would be a header above the door opening

Agreed. There'd be, most likely, a header above it with 2x10s turned on edge. That's framed to be a non-load wall with 2x4's on the wide edge. If it is load-bearing, the builder was a dipshit.

Demonpenz · 01-02-2023, 01:38 PM

I came on winnie the poo wallpaper in the kids room. It was a load bearing wall

**notorious** · 01-02-2023, 01:51 PM

Have you thrown more touchdown passes than you have bathrooms, BigRich?

**BigRichard** · 01-02-2023, 02:07 PM

Quote:

Originally Posted by notorious

Have you thrown more touchdown passes than you have bathrooms, BigRich?

I am not sure how to answer this one.

**notorious** · 01-02-2023, 02:11 PM

Quote:

Originally Posted by BigRichard

I am not sure how to answer this one.

01-02-2023, 10:48 AM
BigRichard Buddy Christ is a Chiefs fan Join Date: Nov 2008 Casino cash: $-1700454	Load Bearing Wall Happy New Years everyone. A couple of quick questions for the construction guys. I am working on remodeling some stuff in my house. I want to take down a small piece of a wall and I am trying to decide if it is load bearing or not. The wall does run perpendicular to the trusses/floor boards so it is a possiblity but I am pretty certain it isn't. The things that lead me to believe this are a few different things... This wall is only 5 feet from the outside wall and there is another wall running for most of the length of the house down the middle(wall behind the shower in the picture). I believe that wall would be the load bearing one in this case. The other thing is there was a door frame in this section of the wall and from my picture you can see the frame isn't even sitting down on the wood for support. For it to be load bearing you shouldn't see that gap like you can in the picture I would think. I also thought door frames on load bearing walls would have two 2x4s supporting the two 2x4's across the top and not just one like there is. The previous owner said he couldn't find the original prints for it but he said something about using trusses so he didn't think it was load bearing... Not sure if trusses have any relevance to that wall being load bearing or not but maybe someone can answer that as well.
Posts: 11,297

01-02-2023, 11:49 AM	#17
TribalElder Arrowhead Trail of Tears Join Date: Oct 2012 Location: KansasCity Casino cash: $-469559	looking for a skank with a load bearing face
Posts: 29,548

01-02-2023, 12:01 PM	#18
ChiefsFan63 Starter Join Date: May 2022 Location: Butler County Kansas Casino cash: $-6409500	If your house is built using roof trusses it would be easy to look in the attic and see what direction they are running. Or just look a the ridge of your roof. A bearing wall will run perpendicular to the roof and floor joists of trusses. I agree with an earlier post that I doubt it is a bearing wall. That is definitely non-bearing construction. But yeah, some people do some shady stuff in construction. __________________ Over 50 years of Chief fandom. 2024 Adopt-a-Chief: Bryan Cook
Posts: 444

01-02-2023, 01:38 PM	#20
Demonpenz Woman should only make babies Join Date: Nov 2003 Location: Apartment "G UNIT!" Casino cash: $-203864	I came on winnie the poo wallpaper in the kids room. It was a load bearing wall __________________
Posts: 54,942

01-02-2023, 01:51 PM	#21
notorious Supporter Join Date: May 2005 Location: Who knows? Casino cash: $-754116	Have you thrown more touchdown passes than you have bathrooms, BigRich?
Posts: 88,500	1 0