Question for mechanics

[stumppy]

Originally Posted by Lzen

I may try that first. The thing was that I was trying to replace the PCV valve and that's how I got to where I am. The PCV is on the back side of the throttle body where that elbow is attached.

Isn't it nice how they put the things together.
I'd do what you suggested earlier if you're not used to working on one, look for a youtube video. More than likely if you are just a little handy with a wrench you should be able to do it yourself without any problems. You may end up still needing an IAC motor but for the effort and time I would try these simple repairs first. You'll save yourself a trip to the shop and a couple hundred bucks if it works.